Simplex SC APC 9/125 Single Mode Fiber Optic Pigtail

The Simplex SC APC 9/125 Single Mode Fiber Optic Pigtail is a fibre optic termination cable designed to provide reliable connections in single-mode fibre networks. Featuring an SC/APC connector on one end and an unterminated fibre on the other, it allows fibre technicians to create permanent spliced connections inside fibre distribution boxes, optical termination boxes and patch panels.

Designed for fibre-to-the-home (FTTH), fibre-to-the-building (FTTB), telecommunications and ISP network installations, this simplex fibre optic pigtail provides a practical solution for terminating optical fibres while maintaining dependable signal transmission. Its angled-polished SC/APC connector helps minimise reflected optical signals, making it particularly suitable for passive optical networks and other applications requiring low back reflection.

Whether you are installing a new FTTH connection, expanding an existing fibre network or maintaining telecommunications infrastructure, the SC APC 9/125 Single Mode Fiber Optic Pigtail offers a convenient way to connect spliced fibre cables to compatible optical equipment. It is suitable for professional fibre installers, internet service providers, networking contractors and telecommunications technicians across Kenya.

Key Features of Simplex SC APC 9/125 Single Mode Fiber Optic Pigtail

• Single-mode optical fibre: Uses 9/125 µm fibre designed for single-mode optical transmission.

• SC/APC connector: Features an SC connector with angled physical contact polishing to reduce back reflection.

• Simplex construction: Contains one optical fibre for a single fibre connection.

• Pre-terminated connector: One end is factory-fitted with an SC/APC connector, reducing the need for field connector polishing.

• Unterminated fibre end: Designed for fusion splicing to a compatible single-mode fibre cable.

• Low-reflection connection: The APC connector design helps maintain optical signal quality in applications sensitive to reflections.

• FTTH compatibility: Suitable for fibre access networks, optical distribution points and subscriber termination installations.

• Single-mode network applications: Appropriate for compatible telecommunications, broadband and optical distribution infrastructure.

• Compact termination design: Suitable for routing and organising within fibre termination enclosures.

• Professional installation: Designed for fibre technicians using appropriate fibre preparation, splicing and testing equipment.

Important: The exact fibre grade, pigtail length, buffer diameter, jacket material and optical loss ratings depend on the supplied manufacturer and product variant. These specifications should be confirmed before ordering.

SC/APC Connector for Reliable Fibre Termination

The SC/APC connector is one of the defining features of this single-mode fibre optic pigtail. SC connectors use a push-pull connection mechanism, allowing installers to connect the pigtail to compatible SC/APC adapters and optical interfaces.

APC stands for Angled Physical Contact. Unlike a standard UPC connector, an APC connector uses an angled polished fibre end face, typically at 8 degrees, to direct reflected light away from the fibre core.

This design is particularly valuable in optical networks where excessive reflection can interfere with signal quality.

Benefits of SC/APC connectivity include:

• Reduced optical back reflection compared with conventional flat-polished connections.

• Compatibility with matching SC/APC fibre adapters and interfaces.

• Convenient connection and disconnection during network maintenance.

• Suitability for FTTH and passive optical network installations.

• Reliable optical termination when correctly installed, cleaned and tested.

SC/APC connectors are commonly identified by green connector housings. However, connector colour should not be the only method used to verify compatibility.

Important compatibility note: SC/APC and SC/UPC connectors should not be directly mated. Their different polished end-face geometries can result in high insertion loss, poor connection performance or connector damage.

9/125 µm Single-Mode Fibre Technology

The Simplex SC APC 9/125 Single Mode Fiber Optic Pigtail uses single-mode optical fibre with a nominal core diameter of 9 micrometres and cladding diameter of 125 micrometres.

Single-mode fibre is widely used in telecommunications and broadband networks because it supports optical signal transmission over substantial distances when paired with suitable equipment.

The pigtail provides a short termination section between the main installed fibre cable and an SC/APC optical connection.

Typical applications include:

• FTTH broadband subscriber connections.

• GPON optical distribution networks.

• Telecommunications fibre termination systems.

• Fibre distribution frames and patch panels.

• Fibre optic termination boxes.

• Business and enterprise fibre infrastructure.

• Optical network equipment interconnections.

Single-mode pigtails are available in different fibre grades, including ITU-T G.652.D and bend-insensitive G.657 variants. The exact grade supplied should be verified because bending performance and installation requirements can differ.

Simplex Construction and Fusion Splicing

This fibre optic pigtail uses a simplex configuration, meaning it contains one optical fibre rather than two fibres within a duplex assembly.

One end has a factory-installed SC/APC connector, while the opposite end is left unterminated for splicing.

During installation, a fibre technician prepares the open fibre end and joins it to the incoming single-mode cable using a compatible fusion splicing machine.

The completed splice is normally protected using a splice protection sleeve and arranged inside a suitable fibre splice tray or termination enclosure.

Advantages of this termination method include:

• A factory-prepared optical connector at the equipment connection point.

• A permanent spliced connection to the incoming fibre cable.

• Reduced need for manual connector assembly in the field.

• Convenient fibre organisation inside termination boxes.

• Easier replacement or disconnection at the SC/APC adapter when maintenance is required.

Correct fibre preparation, cleaving, splicing and protection are essential for achieving a dependable installation.

Optical Performance and Signal Quality

The SC/APC pigtail is designed to provide a low-loss optical connection when correctly matched with compatible fibre components.

Its factory-terminated connector helps eliminate the need to polish the connector end face during installation, while the APC design reduces reflected light at the connection interface.

Optical performance depends on several factors, including the connector manufacturer, fibre grade, splice quality and cleanliness of the mating surfaces.

Commercial SC/APC single-mode pigtails are available with manufacturer-rated insertion loss of 0.3 dB or less and return loss exceeding 55–60 dB. However, these values are examples from specific manufacturer variants and are not confirmed ratings for the exact pigtail offered here.

For installations with strict optical budgets, buyers should request the actual product's optical test specifications.

Technicians should also check completed connections using appropriate fibre optic testing equipment to verify acceptable performance.

Best Uses for Simplex SC APC 9/125 Single Mode Fiber Optic Pigtail

FTTH and GPON Network Installations

This pigtail is suitable for FTTH deployments where incoming single-mode optical fibre needs to terminate at an SC/APC adapter.

It is commonly used inside fibre distribution boxes, fibre access terminals and customer-side optical termination enclosures.

ISP Fibre Network Deployment

Internet service providers can use SC/APC pigtails when terminating subscriber distribution fibres and preparing optical connection points within their networks.

For larger fibre rollout projects, professional network design and installation services from OrbitLink Solutions can support fibre deployment planning, structured cabling and business network integration.

Fibre Distribution Boxes and Patch Panels

The pigtail allows incoming fibre cables to be fusion-spliced and presented through an accessible SC/APC adapter.

This arrangement improves fibre organisation and provides a convenient point for connecting compatible patch cords.

Business and Commercial Fibre Networks

Businesses deploying single-mode optical backbone infrastructure can use compatible SC/APC pigtails in fibre termination panels and distribution enclosures where this connector type is specified.

The correct connector and fibre grade must match the overall network design.

Fibre Network Repairs and Maintenance

During fibre maintenance, technicians may use replacement pigtails to restore damaged connector terminations or rebuild faulty optical connection points.

The fibre should be properly prepared, fusion-spliced and tested before the connection is returned to service.

Simplex SC APC 9/125 Single Mode Fiber Optic Pigtail Specifications

These specifications identify the pigtail configuration. Manufacturer-specific performance values and physical dimensions should be checked against the actual stock supplied.

Who Should Buy Simplex SC APC 9/125 Single Mode Fiber Optic Pigtail?

This fibre optic pigtail is an appropriate choice for professionals working with single-mode optical connections.

Recommended buyers include:

• Internet service providers: For fibre subscriber installations and optical distribution networks.

• Fibre optic technicians: For fusion splicing, fibre termination and maintenance work.

• Telecommunications contractors: For access network installation and optical termination projects.

• Network installation companies: For compatible single-mode fibre infrastructure deployments.

• IT departments: For managing enterprise fibre termination points.

• FTTH installers: For connecting incoming optical fibres to compatible SC/APC interfaces.

For companies purchasing multiple units for fibre rollout projects, selecting the correct pigtail length, fibre grade and connector finish helps ensure consistency during installation.

Simplex SC APC 9/125 Single Mode Fiber Optic Pigtail Price in Kenya

The Simplex SC APC 9/125 Single Mode Fiber Optic Pigtail price in Kenya may vary depending on the manufacturer, fibre grade, cable length, stock availability and quantity purchased.

Other factors that may influence pricing include exchange rates, shipment costs, protective packaging and whether the pigtails are supplied individually or in multipacks.

For the latest selling price and stock availability, visit Tawa Kenya. Customers purchasing fibre installation materials can also enquire about compatible SC/APC adapters, fibre distribution boxes, splice protection sleeves and other fibre optic accessories.

Tawa is a convenient destination for customers looking to source fibre optic networking accessories for installations in Kenya.

What to Check Before Buying

Before ordering the Simplex SC APC 9/125 Single Mode Fiber Optic Pigtail, verify the following details to ensure compatibility with your installation.

1. Connector compatibility

Confirm that your fibre adapter, termination panel or equipment interface requires an SC/APC connector rather than SC/UPC.

2. Fibre type

Ensure the pigtail is compatible with the single-mode fibre already installed in your network. Confirm the precise fibre grade when required by the project specification.

3. Pigtail length

Select a suitable length for the available routing space inside the fibre termination enclosure. Avoid selecting a length that creates excessive tension or unnecessary fibre congestion.

4. Cable construction

Check the buffer diameter and jacket material, particularly when the installation requires specific mechanical or building-cabling properties.

5. Installation equipment

A fusion splicing machine, fibre cleaver, stripping tools and appropriate splice protection materials are typically required to complete the permanent fibre connection.

6. Optical performance

For networks with strict link-loss requirements, confirm the manufacturer's insertion loss and return loss specifications.

7. Accessories

Check whether SC/APC adapters, splice sleeves and termination boxes are required separately. These items should not be assumed to be included with the pigtail.

Buy Simplex SC APC 9/125 Single Mode Fiber Optic Pigtail in Kenya

The Simplex SC APC 9/125 Single Mode Fiber Optic Pigtail is a practical fibre termination component for FTTH installations, ISP optical distribution networks, telecommunications infrastructure and enterprise fibre connections. Its single-mode construction, factory-terminated SC/APC connector and splice-ready fibre end make it suitable for professional fibre installation and maintenance.

Whether you are terminating a single subscriber connection or sourcing multiple fibre optic pigtails for a larger network deployment, selecting the right connector type, fibre grade and length is essential. Confirm these details before ordering to ensure the pigtails match your equipment and installation requirements.

Shop Simplex SC APC 9/125 Single Mode Fiber Optic Pigtail in Kenya at Tawa for current pricing, product availability and compatible fibre optic accessories. Get the fibre termination components you need for dependable, professionally installed optical connections.