Scoop Cat 6 UTP Ethernet LAN Cable

The Scoop Cat 6 UTP Ethernet LAN Cable is a 305-metre bulk Cat6 network cable designed for cost-conscious Ethernet cabling installations. It is supplied in an easy-pull box, making it convenient for technicians and installers who need to run multiple network cable lengths from a single roll.

This particular Scoop model, UTP-6305C, uses Copper-Clad Aluminium (CCA) conductors, four twisted pairs and an unshielded UTP construction. It is best suited to buyers who specifically need an economical Cat6 cabling option and understand the difference between CCA and solid-copper Ethernet cable.

The cable can be considered for general network cabling projects where its construction matches the installation requirements. Before buying, especially for professional, commercial or tender-based projects, confirm that CCA cable and UTP construction are acceptable for the intended application.

Key Features of Scoop Cat 6 UTP Ethernet LAN Cable

• Brand: Scoop

• Model / SKU: UTP-6305C

• Cable category: Cat6

• Cable length: 305 metres

• Construction: UTP – Unshielded Twisted Pair

• Conductor material: Copper-Clad Aluminium (CCA)

• AWG rating: 23 AWG

• Conductor dimension: 0.56 mm

• Number of pairs: 4

• Cross filter: Yes

• ESD drain wire: None

• Outer jacket: PVC

• Colour: Grey

• Packaging: Easy-pull 305 m box

• Designed as a cost-effective network cabling solution

305-Metre Bulk Network Cable

The Scoop Cat 6 UTP Ethernet LAN Cable comes in a 305-metre box, making it more practical than individual patch cords when installing multiple network points.

Installers can pull the required length from the box and cut each run according to the layout of the building or network installation.

This format is useful where several network cable runs need to be installed from a central location to different termination points.

For technicians, contractors and network installers, the 305-metre packaging also makes it easier to plan cable quantities for medium and larger projects.

Cat6 UTP Construction

This Scoop cable uses UTP construction, meaning Unshielded Twisted Pair.

Inside the cable are four twisted pairs. Unlike FTP or other shielded cable designs, this model does not include an additional foil shield or ESD drain wire.

UTP cable is commonly selected for conventional Ethernet cabling environments where shielding is not required by the project design.

However, the correct cable type should always be determined by the installation environment. If a particular project requires shielded Ethernet cable, this UTP model should not automatically be substituted.

Scoop offers other cable variants with different construction, including outdoor FTP models, so buyers should confirm that they are ordering the correct SKU for the job.

Copper-Clad Aluminium Conductors

One of the most important specifications of the Scoop Cat 6 UTP Ethernet LAN Cable is its conductor material.

This model uses CCA — Copper-Clad Aluminium.

CCA cable uses aluminium-based conductors with a copper coating. Scoop itself positions this construction as a cost-effective network cabling solution and notes that CCA has higher DC resistance than solid-copper cable.

That distinction matters.

This Scoop cable should therefore not be described as pure copper or solid-copper Ethernet cable.

If a project specification requires solid bare copper, the installer should choose a suitable solid-copper cable instead of assuming all Cat6 cables use the same conductor material.

CCA can be attractive when project cost is a major consideration, but the buyer should select it deliberately rather than purchasing it under the impression that it is solid copper.

23 AWG Conductors

The verified Scoop specification lists the cable as 23 AWG with a conductor dimension of 0.56 mm.

AWG refers to American Wire Gauge and is used to describe conductor size.

For this product page, the important point is that the manufacturer specifically identifies this model as a 23 AWG CCA cable. Buyers comparing it with another cable should check both the AWG rating and the conductor material rather than comparing only the Cat6 label.

A 23 AWG CCA cable and a 23 AWG solid-copper cable are not identical products.

Four Twisted Pairs

The cable contains four twisted pairs, which is the standard internal pair arrangement associated with this Cat6 cable construction.

Twisting the conductors into pairs is an important part of Ethernet cable design.

The Scoop UTP-6305C also includes a cross filter inside the cable. The manufacturer specifically lists this feature in the product specifications.

The cross filter helps keep the internal pairs separated and organised throughout the cable.

For installers terminating the cable, maintaining the pair arrangement properly during termination is important for producing a clean network installation.

PVC Outer Jacket

The Scoop UTP-6305C uses a PVC outer jacket.

This is different from Scoop's dedicated outdoor Cat6 variants, which use different jacket materials and cable construction.

For that reason, buyers should not assume that this grey PVC model has the same outdoor characteristics as Scoop's black outdoor FTP cable.

If the installation will be exposed to weather, sunlight or outdoor conditions, check for a cable specifically designed for outdoor deployment.

The cable type should always match the actual environment in which it will be installed.

Easy-Pull Box for Installers

The cable is supplied in an easy-pull 305-metre box.

This packaging is particularly convenient when installing multiple Ethernet cable runs because the installer can pull the required length directly from the box without first unrolling an entire cable reel.

It can also make cable handling neater on installation sites where technicians are moving from one network point to another.

For businesses and installers working on multiple jobs, purchasing cable in bulk boxes can make stock management easier than relying entirely on pre-made Ethernet cables.

Best Uses for Scoop Cat 6 UTP Ethernet LAN Cable

The Scoop Cat 6 UTP Ethernet LAN Cable can be considered for general Ethernet cabling projects where Cat6 UTP CCA cable matches the technical requirements.

Typical environments may include:

• Home network cabling

• Office Ethernet cabling

• Small business networks

• Retail premises

• Schools and training facilities

• General structured cabling

• Network cabinet installations

• Router and switch interconnections through permanent cabling

• Network wall-point installations

• IT and networking projects

The suitability of the cable should still be checked against the actual equipment, installation distance, environmental conditions and project specifications.

For larger commercial installations or projects requiring structured network design and professional cabling, OrbitLink Solutions may be useful for network planning, installation and enterprise deployment support.

For purchasing the actual Scoop cable and related networking products, Tawa should remain the primary buying destination.

Suitable for Network Technicians and Installers

The 305-metre format makes this Scoop cable particularly practical for network technicians.

Instead of buying separate long Ethernet cords, the installer can cut individual cable lengths based on the site layout.

It may suit:

• Network installers

• ICT technicians

• Structured cabling technicians

• CCTV and IP-network contractors where the cable meets project requirements

• Electricians handling data cabling

• IT support companies

• Network resellers

• Small businesses installing multiple network points

• Home networking installers

For professional projects, installers should verify the cable specification before beginning work, particularly where the client has specified solid copper, shielded cable or another specific cable standard.

CCA vs Solid Copper

Buyers comparing Ethernet cables should pay close attention to the conductor material.

The Scoop UTP-6305C uses CCA, while other Cat6 cables may use solid bare copper.

These should not be treated as identical options.

Scoop explicitly states that the copper-coated aluminium used in this product has higher DC resistance than solid copper cable.

Solid copper may therefore be specified in installations where project standards, electrical characteristics or equipment requirements demand it.

The main reason to consider this Scoop CCA version is its positioning as a more cost-effective cabling solution.

If your project documentation specifically states "solid copper Cat6," purchase a solid-copper model rather than this CCA version.

UTP vs FTP Cable

This product is also specifically a UTP cable.

UTP means there is no foil shielding around the cable pairs.

Scoop separately manufactures an outdoor Cat6 FTP CCA cable, so the UTP-6305C should not be confused with those shielded models.

FTP cable may be selected for installations requiring additional shielding, while UTP is generally simpler for conventional network cabling where shielding is not part of the specification.

Before ordering, check whether the project requires:

• UTP or FTP construction

• Indoor or outdoor cable

• CCA or solid copper

• A particular jacket type

• A specific colour

• A specific cable length

Making these checks can prevent purchasing a cable that does not match the installation requirement.

What You May Need with the Cable

Bulk network cable normally forms only one part of a complete installation.

Depending on the network design, installers may also require:

• RJ45 connectors

• Keystone jacks

• Network faceplates

• Patch panels

• Patch cords

• Network switches

• Routers

• Network cabinets

• Cable managers

• Crimping tools

• Punch-down tools

• Network cable testers

• Trunking or cable-management accessories

You can browse Tawa for networking equipment and installation accessories that may be required alongside the Scoop Cat6 cable.

Always make sure connectors and termination hardware are appropriate for the cable being installed.

Scoop Cat 6 UTP Ethernet LAN Cable Specifications

These specifications apply to the verified Scoop UTP-6305C grey 305 m model. Scoop also offers other Cat6 cable variants, so confirm the exact SKU before ordering.

What to Check Before Buying

Before buying the Scoop Cat 6 UTP Ethernet LAN Cable in Kenya, first confirm that the UTP-6305C specification fits the project.

Most importantly, check whether CCA conductors are acceptable.

You should also confirm:

• Whether the project requires CCA or solid copper

• Whether UTP cable is suitable

• Whether the cable will be installed indoors or outdoors

• Required total cable quantity

• Number of network cable runs

• Required connectors and termination hardware

• Whether a specific cable certification is mandatory for the project

• Whether the equipment manufacturer specifies a particular cable type

• Current stock availability

• Current Kenya price

Do not assume that one Cat6 cable can automatically replace another Cat6 cable without comparing their construction.

Scoop Cat 6 UTP Ethernet LAN Cable Price in Kenya

The Scoop Cat 6 UTP Ethernet LAN Cable price in Kenya can change depending on stock availability, exchange rates, shipment costs and supplier pricing.

A Kenya price should therefore not be invented or copied from an unrelated market.

For the current Scoop Cat 6 UTP Ethernet LAN Cable Kenya price, check Tawa for the latest product listing and availability.

Businesses and installers purchasing several 305-metre boxes should also confirm stock quantities before beginning a large installation.

Tawa can also help you source compatible network accessories and equipment needed to complete the installation.

Why Choose Scoop Cat 6 UTP Ethernet LAN Cable?

The Scoop UTP-6305C offers a straightforward combination of bulk cable quantity and cost-focused construction.

You get:

• 305 metres of Cat6 cable

• Four twisted pairs

• 23 AWG conductors

• 0.56 mm conductor dimensions

• CCA construction

• UTP design

• PVC jacket

• Internal cross filter

• Convenient easy-pull packaging

Its strongest appeal is to buyers who intentionally want an economical CCA network cable rather than a solid-copper cable.

The specification is clearly defined, making it easier to determine whether it matches the requirements of your installation.

Buy Scoop Cat 6 UTP Ethernet LAN Cable in Kenya

The Scoop Cat 6 UTP Ethernet LAN Cable is a practical option for technicians, contractors, businesses and home installers looking for a 305-metre Cat6 UTP CCA cable for suitable Ethernet cabling projects.

Its 23 AWG construction, 0.56 mm CCA conductors, four twisted pairs, PVC outer jacket and easy-pull box make it convenient for running multiple network cable lengths from one bulk package.

Before placing an order, confirm that CCA conductor construction, UTP design and PVC jacket are appropriate for your particular installation. If your project specifically requires solid copper, shielded cable or outdoor-rated cabling, select the correct alternative instead.

To buy Scoop Cat 6 UTP Ethernet LAN Cable in Kenya, visit Tawa to check the latest price, stock availability and compatible networking accessories. For larger network deployments, calculate the required cable quantity before ordering so you can purchase enough 305-metre boxes for the entire project.