D-Link DGS-F1100-10PS-E 8-Port PoE Gigabit Smart Managed Switch

The D-Link DGS-F1100-10PS-E 8-Port PoE Gigabit Smart Managed Switch is a Layer 2 managed network switch designed for CCTV systems, wireless access point deployments, office networks and business installations that require Gigabit Ethernet, PoE+ and fibre uplink connectivity.

It provides 8 Gigabit PoE Ethernet ports for connecting and powering compatible network devices together with 2 Gigabit SFP ports for fibre uplinks. This combination makes the switch useful where IP cameras, wireless access points, VoIP equipment and other PoE-powered devices need to connect back to a managed Gigabit network.

With a documented 96W PoE budget, IEEE 802.3af/at compatibility, VLAN management, QoS, spanning tree, link aggregation and a long-range operating mode supporting transmission distances up to 250 metres, the DGS-F1100-10PS-E is well suited to professional surveillance and business networking installations.

Key Features of D-Link DGS-F1100-10PS-E

• 8 × 10/100/1000 Mbps PoE RJ45 ports

• 2 × Gigabit SFP ports

• 10 total network ports

• IEEE 802.3af PoE support

• IEEE 802.3at PoE+ support

• Up to 30W output per PoE port

• 96W total PoE budget

• Up to 250 metres long-range transmission in Extend Mode

• Extend Mode available on ports 1–8

• 20Gbps switching capacity

• 14.88Mpps packet-forwarding performance

• 8K MAC address table

• 4.1Mbit packet buffer

• 128MB DRAM

• 16MB flash memory

• 6kV lightning protection

• IEEE 802.1Q VLAN support

• Up to 4K VLANs

• QoS traffic management

• STP, RSTP and MSTP support

• Static and dynamic link aggregation

• IGMP Snooping

• DHCP Snooping

• Port isolation

• Port mirroring

• ACL support

• Web, CLI and SNMP management

• PD Alive Mode for supported PoE-device recovery

• External 52V/1.85A power adapter

8 Gigabit PoE Ports

The D-Link DGS-F1100-10PS-E provides eight 10/100/1000 Mbps RJ45 Ethernet ports with Power over Ethernet support.

These ports can carry network traffic and electrical power through the same Ethernet cable when used with compatible PoE equipment.

This makes the switch particularly useful for installations involving devices such as:

• IP surveillance cameras

• Wireless access points

• VoIP phones

• Compatible access-control equipment

• Other IEEE 802.3af or 802.3at powered devices

Using PoE can simplify installation because a separate electrical socket does not necessarily have to be installed beside every compatible network device.

IEEE 802.3af/at PoE+ Support

The DGS-F1100-10PS-E supports both IEEE 802.3af and IEEE 802.3at Power over Ethernet standards.

D-Link specifies a maximum power output of up to 30W per PoE port, subject to the overall power budget and the requirements of the connected device.

This makes the switch suitable for many common business and surveillance PoE devices.

Before installation, always verify that the connected equipment uses a compatible PoE standard.

96W Total PoE Budget

D-Link specifies a 96W total PoE power budget for the DGS-F1100-10PS-E.

The important point for buyers is that 96W is shared across all eight PoE ports. Although an individual port can support up to 30W, all eight ports cannot simultaneously draw 30W each because that would exceed the switch's total available PoE capacity.

For example, an installation containing several cameras or wireless access points should be planned using the actual power consumption of each device.

Add the maximum PoE requirement of all connected devices and confirm that the combined requirement remains within the available 96W budget.

2 Gigabit SFP Fibre Ports

The D-Link DGS-F1100-10PS-E includes two Gigabit SFP ports in addition to its eight copper Ethernet ports.

The SFP interfaces allow the switch to be connected to compatible fibre-optic network links when suitable SFP transceivers are installed.

This is useful for applications such as:

• Connecting two network cabinets

• Linking different buildings

• Extending a LAN over fibre

• Connecting a CCTV network to a central network room

• Building fibre-backed business networks

The supported fibre distance depends on the SFP transceiver and fibre cable selected. Fibre modules should therefore be chosen according to the fibre type, wavelength and distance required by the installation.

Businesses requiring structured fibre or enterprise network deployment can also use professional network design and installation services from OrbitLink Solutions.

Up to 250m Long-Range Transmission

The DGS-F1100-10PS-E includes an Extend Mode intended for longer-distance Ethernet and PoE installations.

According to D-Link documentation, ports 1–8 can support transmission distances of up to 250 metres when Extend Mode is enabled and appropriate Cat5e or Cat6 cabling is used.

This can be especially useful in CCTV installations where cameras may be positioned far from the main network cabinet.

Potential applications include:

• Perimeter surveillance

• Gate cameras

• Parking areas

• Warehouses

• Schools

• Industrial compounds

• Commercial premises

• Large residential properties

Actual achievable distance and performance still depend on cable quality, installation conditions and connected equipment.

Four DIP Switch Operating Modes

The DGS-F1100-10PS-E provides hardware DIP-switch controls that can change how the switch operates.

D-Link documents four principal operating functions:

Extend Mode

Allows ports 1–8 to support long-distance PoE and data transmission of up to approximately 250 metres when suitable network cable is used.

Port Isolation Mode

Ports 1–8 can be isolated from each other.

This is useful in surveillance networks because edge devices can be prevented from communicating directly with one another while still communicating through the required uplink path.

QoS Mode

QoS mode allows important application traffic to be prioritised.

D-Link specifically positions this feature for applications such as video surveillance where smooth transmission is important.

PD Alive Mode

PD Alive Mode can monitor connected powered devices and help recover a device that has stopped responding by cycling PoE power to the affected port.

This can be useful with equipment such as remotely installed IP cameras where manually disconnecting power would be inconvenient.

20Gbps Switching Capacity

The D-Link DGS-F1100-10PS-E has a documented 20Gbps switching capacity.

D-Link also specifies a packet-forwarding performance of approximately 14.88 million packets per second.

These specifications match the switch's role as a 10-port Gigabit Layer 2 switching platform.

It is therefore suitable for typical CCTV, office and access-network environments where Gigabit connectivity is required across multiple devices.

8K MAC Address Table

The switch supports up to 8,000 MAC address entries.

A MAC address table allows the switch to learn which devices are connected to specific ports and forward Ethernet frames to the appropriate destination rather than unnecessarily sending traffic everywhere.

For an 8-port PoE access switch, an 8K MAC table provides ample address capacity for normal intended deployments.

VLAN Support

The DGS-F1100-10PS-E provides extensive VLAN functionality.

Supported VLAN features include:

• IEEE 802.1Q VLAN

• MAC-based VLAN

• IP-based VLAN

• Voice VLAN

• Up to 4K VLANs

VLANs allow administrators to logically separate different categories of network traffic.

For example, one switch could carry CCTV, office, voice and management traffic while keeping those networks logically separated according to the network design.

Quality of Service

The switch supports Quality of Service features that allow network traffic to be prioritised.

D-Link documents support for:

• Port priority

• IEEE 802.1p priority

• DSCP priority

• SP scheduling

• RR scheduling

• WRR scheduling

• WFQ scheduling

QoS can be useful where important applications such as voice or surveillance traffic share the same network infrastructure with ordinary data traffic.

Spanning Tree Support

The DGS-F1100-10PS-E supports several spanning-tree technologies, including:

• IEEE 802.1D STP

• IEEE 802.1w RSTP

• IEEE 802.1s MSTP

These technologies are designed to help prevent Layer 2 loops when switches have redundant network paths.

The switch also supports related protections including loop protection, root-bridge protection and BPDU-related controls.

Link Aggregation

The DGS-F1100-10PS-E supports both static and dynamic link aggregation.

D-Link documentation lists IP, MAC and hybrid load-balancing modes and support for multiple aggregation groups.

Link aggregation can be used to combine compatible Ethernet links between supported networking devices.

Correct operation depends on proper configuration at both ends of the connection.

Multicast Support

The switch supports IGMP v1/v2 Snooping and several multicast-management features.

These include:

• IGMP Snooping

• Fast Leave

• Multicast VLAN

• Multicast filtering

• Unknown multicast discard controls

These features allow the switch to manage multicast traffic more efficiently rather than unnecessarily forwarding multicast packets to every port.

Network Security Features

The DGS-F1100-10PS-E provides more security functionality than a basic unmanaged PoE switch.

Documented features include:

• Port security

• Port isolation

• DHCP Snooping

• ARP protection

• IP source protection

• DoS protection

• IP-MAC-port binding

• 802.1X

• AAA

• Access Control Lists

• L2–L4 packet filtering

• Broadcast suppression

• Unknown unicast suppression

• Multicast suppression

The actual security benefit depends on how these functions are configured.

PoE Management

The switch provides dedicated PoE-management functions rather than simply supplying power continuously to every port.

D-Link documents features including:

• PoE power limits

• PoE chip-status monitoring

• PoE-port priority

• Scheduled PoE power periods

• PD Alive monitoring

These functions can give administrators better control over how the available PoE budget is distributed.

Network Management

The DGS-F1100-10PS-E can be managed using several interfaces and protocols.

D-Link documentation lists support for:

• Web management using HTTP/HTTPS

• CLI

• Telnet

• SSH

• SNMP v1/v2/v3

• LLDP

• RMON

• System logging

• Ping

• Traceroute

• Cable detection

This gives installers and network administrators more control than they would get from an unmanaged switch.

6kV Lightning Protection

D-Link specifies 6kV lightning protection for the DGS-F1100-10PS-E.

This provides an additional level of electrical protection for networking deployments, particularly those involving long Ethernet cable runs.

However, built-in surge protection should not automatically be treated as a replacement for proper grounding, external surge protection and good installation practices where the environment requires them.

Hardware Specifications

The core verified hardware specifications include:

• Ports: 8 × Gigabit PoE RJ45

• Fibre interfaces: 2 × Gigabit SFP

• Switching capacity: 20Gbps

• Packet forwarding: 14.88Mpps

• MAC address table: 8K entries

• Packet buffer: 4.1Mbits

• DRAM: 128MB

• Flash memory: 16MB

• PoE budget: 96W

• Power input: External 100–240V AC adapter

• Power-adapter output: 52V / 1.85A

• Lightning protection: 6kV

• Dimensions: 228 × 121 × 37mm

• Weight: approximately 1.25kg

Operating Environment

D-Link specifies the following environmental limits:

• Operating temperature: 0°C to 40°C

• Storage temperature: -40°C to 70°C

• Operating humidity: 10% to 90% non-condensing

• Storage humidity: 5% to 95% non-condensing

The switch should be installed in a suitable indoor network environment with adequate airflow and protection from moisture.

Best Uses for D-Link DGS-F1100-10PS-E

The DGS-F1100-10PS-E is particularly suitable for:

• IP CCTV systems

• Wireless access point networks

• Small and medium business networks

• Office networking

• School networks

• Hotel networks

• Apartment networks

• Warehouse surveillance

• Retail businesses

• Access-control networks

• Fibre-linked network cabinets

• Long-distance PoE installations

• Managed business networks

Who Should Buy the D-Link DGS-F1100-10PS-E?

The DGS-F1100-10PS-E is a strong option for buyers who need more than a basic unmanaged PoE switch.

It is especially appropriate where the installation requires:

• Eight PoE-powered endpoints

• Gigabit Ethernet

• Fibre SFP uplinks

• VLAN segmentation

• PoE management

• Long-range Ethernet

• Network monitoring

• Layer 2 management

CCTV installers can benefit from its PoE, port-isolation and PD Alive functions, while businesses can use its VLAN, QoS, security and management capabilities.

What to Check Before Buying

Before purchasing the D-Link DGS-F1100-10PS-E, confirm:

• How many PoE devices will be connected

• Power requirement of each PoE device

• Whether the 96W total PoE budget is sufficient

• Whether devices support IEEE 802.3af or 802.3at

• Whether fibre SFP connectivity is required

• Which SFP modules are required

• Required fibre type and distance

• Ethernet cable length

• Whether Extend Mode is required

• Required VLAN and management features

• Whether additional surge protection is appropriate

Do not choose a PoE switch based only on the number of PoE ports. The total PoE power requirement is equally important.

D-Link DGS-F1100-10PS-E Price in Kenya

The D-Link DGS-F1100-10PS-E price in Kenya can change depending on stock levels, exchange rates, shipping costs and supplier pricing.

For that reason, customers should check Tawa for the current selling price and stock availability instead of relying on a fixed price that may become outdated.

When comparing offers, also confirm whether your installation requires additional equipment such as SFP modules, fibre patch cords, Ethernet cables, racks, patch panels or surge protection.

Buy D-Link DGS-F1100-10PS-E in Kenya

The D-Link DGS-F1100-10PS-E 8-Port PoE Gigabit Smart Managed Switch is designed for buyers who need Gigabit PoE connectivity together with fibre uplinks and Layer 2 management.

Its combination of eight Gigabit PoE ports, two Gigabit SFP ports, a 96W PoE budget, VLAN support, QoS, network-security controls, PD Alive and up to 250m long-range transmission makes it particularly useful for CCTV, wireless and business networking projects.

Before ordering, confirm the total PoE power required by your connected devices and verify any SFP modules or additional cabling required for the project.

To buy the D-Link DGS-F1100-10PS-E in Kenya, check current stock and pricing from Tawa. Tawa should be your main buying destination for the switch and compatible networking accessories needed to complete the installation.