D-Link DGS-1210-28P 28-Port Gigabit PoE Switch

The D-Link DGS-1210-28P 28-Port Gigabit PoE Switch is a Smart Managed business network switch designed for offices, CCTV systems, schools, hotels, retail environments, institutions and growing enterprise networks that need Gigabit connectivity together with Power over Ethernet.

It provides 24 Gigabit Ethernet PoE ports for connecting and powering compatible devices such as IP cameras, wireless access points, VoIP phones and other IEEE 802.3af/802.3at equipment. It also includes 4 Gigabit RJ45/SFP combo ports, giving network administrators flexibility when connecting other switches, servers or fibre uplinks.

For businesses that have outgrown basic unmanaged switches but do not necessarily require a complex enterprise core switch, the DGS-1210-28P offers a useful middle ground. Features such as VLANs, link aggregation, Spanning Tree, IGMP Snooping, security controls and static routing give administrators considerably more control over network traffic while keeping management practical.

Key Features of D-Link DGS-1210-28P

• 24 × 10/100/1000BASE-T Gigabit Ethernet PoE ports

• 4 × Gigabit RJ45/SFP combo ports

• IEEE 802.3af PoE and 802.3at PoE+ support

• 193 W total PoE power budget on current Revision F models

• Up to 30 W per compatible PoE+ port, subject to the overall PoE budget

• 56 Gbps switching capacity

• Maximum forwarding rate of approximately 41.7 Mpps

• 8K MAC address table on current Revision F hardware

• 4.1 Mbit packet buffer

• 128 MB DDR3 memory

• 32 MB flash memory

• Layer 2 management features

• L2+ static routing

• VLAN support

• IEEE 802.1Q VLAN

• Spanning Tree Protocol support

• Link Aggregation support

• IGMP Snooping

• Port mirroring

• QoS functionality

• Network security and access-control features

• D-Link Surveillance Mode

• IEEE 802.3az Energy Efficient Ethernet support

• 19-inch rack-mount form factor

Important: D-Link has produced several hardware revisions of the DGS-1210-28P. Specifications such as PoE budget, memory and internal hardware can differ between revisions. Confirm the hardware revision of the unit being supplied before purchasing when a particular specification is critical.

24 Gigabit PoE Ports for Business Networks

One of the main reasons to buy the D-Link DGS-1210-28P in Kenya is its combination of Gigabit switching and Power over Ethernet.

The switch provides 24 10/100/1000BASE-T Ethernet interfaces capable of carrying network traffic and supplying power to compatible PoE devices over the same Ethernet cable. This can considerably simplify installations because many endpoints no longer require a separate power adapter beside the device.

Typical PoE devices that can be connected include:

• IP surveillance cameras

• Business wireless access points

• VoIP phones

• PoE intercom systems

• Compatible access-control equipment

• Other IEEE 802.3af or IEEE 802.3at powered devices

This makes the DGS-1210-28P particularly attractive for structured CCTV and wireless-network deployments where several powered devices need to terminate at a central communications cabinet.

193 W PoE Power Budget

The current Revision F DGS-1210-28P provides a 193 W total PoE power budget across its PoE-enabled ports.

It supports both IEEE 802.3af PoE and IEEE 802.3at PoE+, allowing it to work with a broad range of standards-compliant powered devices. PoE+ devices can require considerably more power than basic PoE devices, so the overall power requirement of the installation should be calculated before choosing the switch.

For example, having 24 PoE-capable ports does not mean every connected device can simultaneously draw the maximum PoE+ power. The combined load must remain within the switch's available PoE budget.

Before ordering, calculate the expected consumption of your cameras, access points, phones and other PoE equipment and leave reasonable capacity for future expansion.

4 Gigabit RJ45/SFP Combo Ports

Alongside its 24 main Gigabit Ethernet ports, the DGS-1210-28P provides four Gigabit RJ45/SFP combo interfaces.

A combo port lets the administrator use either the corresponding copper Gigabit Ethernet connection or an SFP interface. The paired copper and SFP interfaces are not independent additional ports that can both operate simultaneously.

The SFP option is particularly useful when connecting the switch to another network cabinet over fibre, especially where copper Ethernet distance limitations make a fibre uplink more practical.

Suitable SFP modules must be selected according to factors such as:

• Fibre type

• Multimode or single-mode deployment

• Connector type

• Required transmission distance

• Existing fibre infrastructure

• Compatibility with the switch

For larger office, campus and commercial installations requiring fibre design or professional network deployment, OrbitLink Solutions can assist with structured networking, fibre connectivity and business network implementation.

56 Gbps Switching Performance

The D-Link DGS-1210-28P has a specified 56 Gbps switching capacity and a maximum forwarding rate of approximately 41.7 million packets per second.

This capacity is appropriate for a switch offering multiple Gigabit access ports and Gigabit uplink interfaces. It allows the switch to handle simultaneous network traffic from workstations, cameras, access points, servers and other connected endpoints without relying on Fast Ethernet speeds.

The switch uses a store-and-forward architecture and supports full-duplex operation at Gigabit speeds.

For businesses upgrading from older 10/100 Mbps infrastructure, the move to Gigabit connectivity can provide significantly more local network capacity, particularly when transferring large files, accessing network storage or carrying multiple high-bandwidth network streams.

Smart Managed Network Control

The DGS-1210-28P is not simply an unmanaged plug-and-play switch. It belongs to D-Link's Smart Managed range and provides administrators with network configuration and monitoring features that are useful in professional installations.

These features allow businesses to organise their networks more effectively rather than placing every device on one unrestricted network segment.

The switch includes support for important Layer 2 capabilities such as:

• VLAN configuration

• IEEE 802.1Q VLAN

• Port-based network segmentation

• Link aggregation

• Spanning Tree protocols

• IGMP Snooping

• Port mirroring

• Quality of Service

• Traffic control

• Security features

The exact configuration required will depend on the design of the network.

VLAN Support for Better Network Segmentation

VLANs are particularly valuable in businesses where different types of network traffic should be logically separated.

For example, an administrator could create different VLANs for:

• Employees

• CCTV cameras

• VoIP phones

• Guest Wi-Fi

• Administration systems

• Servers

• Building systems

Proper VLAN design can improve organisation, security and network management without requiring a completely separate physical switch for every device category.

The DGS-1210-28P also supports L2+ static routing, allowing routing between defined network segments in suitable deployments. More complex routing, firewalling, VPN services and internet-edge security will normally still be handled by a dedicated router or firewall.

Surveillance Mode for IP Camera Networks

The DGS-1210 Series includes D-Link's Surveillance Mode, making the DGS-1210-28P particularly relevant to IP surveillance installations.

Surveillance Mode provides a management interface focused on CCTV networking and can help administrators identify compatible ONVIF surveillance devices and organise surveillance traffic more conveniently.

This makes the switch a strong choice for installations such as:

• Office CCTV systems

• Apartment surveillance

• Schools

• Warehouses

• Retail shops

• Hotels

• Hospitals and clinics

• Commercial compounds

• Security control rooms

It is important to remember that the switch carries and powers compatible cameras; it does not replace the NVR, surveillance storage system or video-management software required by the CCTV solution.

Quality of Service for Important Traffic

Quality of Service functionality helps administrators prioritise selected types of network traffic.

This can be useful where the same switch carries a mixture of data, voice and video traffic. For example, properly configured QoS can help protect latency-sensitive VoIP traffic from being adversely affected by lower-priority bulk data transfers.

QoS is especially useful in converged networks where IP phones, computers, wireless access points and surveillance equipment share switching infrastructure.

The final results will depend on correct configuration across the complete network rather than on the switch alone.

Link Aggregation and Network Redundancy Features

The DGS-1210 Series supports Link Aggregation Control Protocol (LACP), which can combine compatible Ethernet links between network devices when the connected equipment is configured appropriately.

This may be useful for uplinks between compatible switches or other networking equipment where additional aggregate capacity or link resiliency is required.

Spanning Tree functionality also helps administrators design switched networks while reducing the risk of Ethernet loops, which can otherwise severely disrupt a network.

These capabilities make the DGS-1210-28P more suitable for structured business networks than a basic unmanaged 24-port PoE switch.

IGMP Snooping for Multicast Traffic

IGMP Snooping allows the switch to manage multicast traffic more intelligently.

Instead of unnecessarily forwarding multicast streams to every network port, the switch can direct compatible multicast traffic toward devices that actually require it.

This may be beneficial in environments using applications such as IPTV, multicast video distribution and other multicast-based network services.

Energy Efficient Ethernet

The DGS-1210-28P supports IEEE 802.3az Energy Efficient Ethernet.

Energy Efficient Ethernet allows supported network interfaces to reduce unnecessary power consumption during periods of low activity. The actual savings depend on network conditions and connected equipment.

For installations running continuously, improvements in network-equipment efficiency can be worthwhile, particularly when several switches are installed throughout a building or organisation.

Rack-Mount Design

The DGS-1210-28P uses a standard 19-inch rack-mountable format, making it appropriate for organised network cabinets and server rooms.

A rack installation helps keep the switch, patch panels, router, fibre termination equipment and other networking hardware properly arranged and easier to maintain.

For professional deployments, good ventilation should be maintained around the switch and the manufacturer's environmental requirements should be observed.

Best Uses for D-Link DGS-1210-28P

The D-Link DGS-1210-28P is particularly suitable for:

• Small and medium-sized business networks

• Corporate offices

• IP CCTV installations

• Wireless access-point deployments

• Hotels and hospitality networks

• Schools and universities

• Hospitals and clinics

• Retail stores

• Warehouses

• Apartment and property networks

• VoIP deployments

• Structured LAN installations

• Network cabinets requiring fibre uplinks

• Multi-VLAN business networks

• Branch-office infrastructure

It is particularly useful where an organisation wants a single switch capable of carrying data while also powering a substantial number of compatible PoE endpoints.

Who Should Buy the D-Link DGS-1210-28P?

The DGS-1210-28P is a strong option for customers who need more functionality than an unmanaged PoE switch but do not require a high-end enterprise Layer 3 core platform.

It suits network administrators and installers who need VLANs, PoE+, fibre uplink flexibility, QoS, surveillance-focused management and other Layer 2 controls from one unit.

For CCTV projects, it can centralise connectivity and power for compatible IP cameras. For office networks, it can support computers, phones and access points while allowing administrators to separate traffic through VLANs.

Companies planning larger or more complicated installations should first create a port plan, PoE power calculation, VLAN design and uplink strategy.

What to Check Before Buying

Before buying a D-Link DGS-1210-28P 28-Port Gigabit PoE Switch, confirm the following:

• Hardware revision: Specifications have changed between DGS-1210-28P revisions.

• PoE budget: Current Revision F documentation specifies 193 W, but older revisions may differ.

• Device power requirements: Calculate the combined PoE consumption of all connected devices.

• PoE standards: Verify that powered devices support compatible IEEE 802.3af or 802.3at power.

• Fibre requirements: Select suitable SFP modules for the fibre type and transmission distance.

• Port requirements: Remember that the four RJ45/SFP interfaces are combo ports.

• Rack requirements: Confirm available rack space and ventilation.

• Management requirements: Make sure the Smart Managed feature set meets your network design.

• Accessories: Confirm whether required SFP modules, patch cords, rack accessories or other components need to be ordered separately.

For compatible switches, cabling, SFP modules, networking accessories and related hardware, check current availability from Tawa Kenya.

D-Link DGS-1210-28P Price in Kenya

The D-Link DGS-1210-28P price in Kenya can vary depending on current stock, exchange rates, shipment costs, hardware revision and any accessories supplied with the unit.

For that reason, it is better to confirm the current selling price rather than relying on an outdated fixed figure.

Visit Tawa to check the latest D-Link DGS-1210-28P price in Kenya, availability and suitable networking accessories for your installation.

When requesting a quotation, it is also advisable to confirm the exact hardware revision being supplied, particularly if your project requires a specific PoE budget or hardware specification.

Buy D-Link DGS-1210-28P in Kenya

The D-Link DGS-1210-28P 28-Port Gigabit PoE Switch is a practical choice for businesses that need Gigabit network connectivity, PoE+ device powering, fibre uplink flexibility and manageable Layer 2 network controls from one rack-mounted switch.

Its combination of 24 Gigabit PoE ports, four Gigabit RJ45/SFP combo ports, a 56 Gbps switching capacity, VLAN management, static routing, Surveillance Mode and a 193 W PoE budget on current Revision F models makes it well suited to business LANs, CCTV networks, access-point deployments, VoIP installations and other structured network environments.

Before ordering, confirm the hardware revision, required PoE capacity, SFP requirements and accessories for your deployment. For current stock, pricing and genuine networking equipment, buy the D-Link DGS-1210-28P from Tawa Kenya and request assistance selecting the correct accessories for your network.