D-Link 8GE PoE+ 2GE Unmanaged PoE Switch

The D-Link 8GE PoE+ 2GE Unmanaged PoE Switch, model DGS-F1010P-E, is a 10-port Gigabit Ethernet switch built for businesses, CCTV installations, offices and other networks that need reliable data connectivity together with Power over Ethernet. It provides 8 Gigabit PoE+ ports plus 2 Gigabit uplink ports, making it particularly practical for connecting IP cameras, wireless access points, VoIP phones and other compatible powered devices.

Instead of installing separate electrical power adapters beside every connected PoE device, the DGS-F1010P-E can carry both network data and electrical power through compatible Ethernet cabling. Its IEEE 802.3af/at PoE support and 120W total PoE power budget make it suitable for installations where several PoE devices need to operate from one central network switch.

For Kenyan buyers looking for a straightforward PoE switch without complicated management requirements, the D-Link 8GE PoE+ 2GE Unmanaged PoE Switch offers a practical plug-and-play solution. It is especially attractive for surveillance networks because D-Link provides an Extend mode supporting connections of up to 250 metres, alongside dedicated VLAN, QoS and PoE operating modes.

Key Features of D-Link 8GE PoE+ 2GE Unmanaged PoE Switch

• Model: D-Link DGS-F1010P-E

• 10 total Gigabit Ethernet ports

• 8 × 10/100/1000 Mbps PoE Ethernet ports

• 2 × 10/100/1000 Mbps Gigabit uplink ports

• Supports IEEE 802.3af and IEEE 802.3at PoE

• 120W total available PoE power budget

• Supports transmission distances of up to 250 metres in Extend mode

• Plug-and-play unmanaged design

• No switch configuration required for normal operation

• 802.3x flow control helps protect against packet loss

• Dedicated operating modes including Extend, VLAN, QoS and PoE

• VLAN mode can isolate PoE ports from one another

• QoS mode is designed to prioritize identified video traffic

• PoE mode provides automatic PoE port monitoring and restart functionality

• D-Link specifies 6kV protection

• Suitable for compatible Cat5e and Cat6 Ethernet cabling

• Designed for CCTV, office and small-to-medium business networking

8 Gigabit PoE+ Ports

One of the biggest reasons to buy the D-Link DGS-F1010P-E is its combination of Gigabit networking and PoE power delivery. Ports 1 through 8 provide 10/100/1000 Mbps Ethernet connectivity together with support for IEEE 802.3af/at Power over Ethernet.

This allows compatible devices to receive power and network connectivity through the same Ethernet cable. A correctly designed installation can therefore use the switch to connect equipment such as PoE surveillance cameras, wireless access points and IP phones without providing a separate power outlet beside every endpoint.

PoE compatibility should always be checked before installation. The connected equipment should support an appropriate IEEE 802.3af or 802.3at power standard, and the combined power requirements of all connected PoE devices should remain within the switch's available PoE budget.

120W PoE Power Budget

D-Link specifies a 120W total PoE budget for the DGS-F1010P-E. This is important because PoE capacity should be evaluated using the total power requirements of the devices being connected rather than simply counting how many PoE ports are available.

For example, a deployment using several relatively low-power surveillance cameras may have very different power requirements from a network running higher-powered access points or other PoE equipment. Before buying, check the maximum power consumption of each device and calculate the total required PoE load.

Leaving some power capacity available rather than designing a network at the absolute edge of its PoE budget can also provide greater flexibility when equipment is changed or additional devices are introduced.

Two Dedicated Gigabit Uplink Ports

In addition to its eight PoE ports, the D-Link 8GE PoE+ 2GE Unmanaged PoE Switch includes two 10/100/1000 Mbps Gigabit Ethernet uplink ports.

These uplinks are valuable in surveillance and business networks because they allow the PoE endpoints to connect back to other network equipment without consuming one of the eight PoE ports. Depending on your network design, an uplink can connect the switch to equipment such as an NVR, router, another Ethernet switch or the wider LAN.

For a CCTV installation, for example, multiple IP cameras can connect to the eight PoE ports while an uplink provides connectivity towards the recording or network infrastructure.

Up to 250-Metre Extend Mode

Standard Ethernet installations are normally designed around substantially shorter cable runs, but CCTV deployments sometimes require cameras to be positioned further away from the central switch.

D-Link designed the DGS-F1010P-E with an Extend operating mode supporting distances of up to 250 metres. D-Link specifically positions this feature for surveillance applications and states that Cat5e or Cat6 cabling can be used.

Actual network performance still depends on cable quality, installation workmanship, interference, terminations and the connected equipment. For critical long-distance deployments, use high-quality cable and have the complete cable run properly installed and tested.

Multiple Operating Modes

Although the D-Link DGS-F1010P-E is an unmanaged switch, D-Link provides a DIP switch that allows the unit to work in several predefined operating modes. This provides useful deployment flexibility without requiring customers to configure a traditional managed-switch interface.

Extend Mode

Extend mode allows ports 1–8 to support long-distance power and connectivity of up to 250 metres. This feature is particularly useful when deploying IP cameras around warehouses, compounds, parking areas and other sites where some endpoints are positioned a considerable distance from the network cabinet.

VLAN Mode

The built-in VLAN operating mode isolates ports 1–8 from each other. D-Link states that this can help suppress network storms and improve network performance.

This can be useful for surveillance deployments where connected endpoint devices primarily need to communicate upstream rather than directly with one another.

QoS Mode

The QoS operating mode prioritizes identified video data, helping provide smoother video transmission. This functionality fits particularly well with the switch's surveillance-oriented design.

PoE Mode

D-Link also provides a PoE operating mode featuring automatic port power detection with power-off and restart functionality. This can be useful in PoE deployments where maintaining powered endpoint availability is important.

Plug-and-Play Unmanaged Networking

The D-Link 8GE PoE+ 2GE Unmanaged PoE Switch does not require conventional switch configuration for normal deployment. It is designed as a plug-and-play device, making it appropriate for customers who need PoE and Gigabit Ethernet connectivity without the additional complexity of a fully managed switch.

Connect the appropriate network devices, connect the uplink to the rest of the network and provide power to the switch. Compatible Ethernet devices can then begin communicating without administrators having to configure VLAN databases, routing tables or management software.

This simplicity makes the DGS-F1010P-E suitable for small offices, retail premises, schools, hotels, residential developments and surveillance projects where advanced Layer 2 or Layer 3 switch management is not required.

If your project requires detailed VLAN configuration, link aggregation, SNMP monitoring, extensive traffic control or other managed networking features, consider a suitable managed or smart-managed switch instead.

802.3x Flow Control

D-Link includes IEEE 802.3x flow control to help provide more reliable traffic handling when a receiving port's buffer becomes full.

For the buyer, the practical benefit is improved handling of temporary congestion and reduced risk of unnecessary dropped packets under appropriate network conditions. This is useful in busy networks and surveillance systems that may have several devices sending traffic simultaneously.

Protection for Real-World Installations

D-Link specifies 6kV protection for the DGS-F1010P-E. This adds an important protection feature for a product that may be used in CCTV and other installations involving Ethernet cable runs around a building or property.

However, built-in switch protection should not be treated as a replacement for proper electrical design. Installers should still use appropriate earthing, surge protection and installation practices where required, particularly for outdoor networks and installations in areas exposed to electrical disturbances.

For professional business network planning, structured cabling or larger PoE deployments, buyers can also consult OrbitLink Solutions for professional networking and installation services.

Best Uses for D-Link 8GE PoE+ 2GE Unmanaged PoE Switch

The DGS-F1010P-E is particularly well suited to applications where several Ethernet devices require both connectivity and PoE power.

Common applications include:

• IP CCTV camera installations

• NVR-based surveillance systems

• Small and medium business networks

• Office network expansion

• PoE wireless access point deployment

• Compatible VoIP telephone systems

• Retail shops and supermarkets

• Hotels and hospitality premises

• Schools and training facilities

• Warehouses and storage facilities

• Apartment and commercial property networks

• Long-distance surveillance camera installations

• Branch-office network deployments

Its combination of eight PoE interfaces and two separate Gigabit uplinks makes it particularly practical when designing compact surveillance systems.

Who Should Buy the D-Link DGS-F1010P-E?

The D-Link 8GE PoE+ 2GE Unmanaged PoE Switch is a good choice for customers who want to connect several PoE devices while avoiding the cost and configuration complexity of a fully managed switch.

CCTV installers can use its eight PoE ports to build IP surveillance networks, while businesses can use it for compatible PoE access points, cameras, phones and other network equipment. Its dedicated uplink ports make integration with a router, NVR or existing network straightforward.

It is less suitable for environments requiring advanced enterprise switch management. Customers who need extensive configurable VLANs, centralized switch monitoring, advanced security controls or Layer 3 networking should consider a managed D-Link model instead.

What to Check Before Buying

Before ordering the D-Link DGS-F1010P-E, check the requirements of the equipment you plan to connect.

Confirm:

• That your devices support Ethernet connectivity

• That powered devices are compatible with IEEE 802.3af or 802.3at where PoE is required

• The combined PoE power demand of all connected equipment

• Whether the 120W PoE budget is sufficient

• The number of PoE endpoints required

• Whether eight PoE ports are enough for the planned installation

• Required Ethernet cable distances

• Cable category and quality

• Whether an unmanaged switch is appropriate for your network

• Whether advanced management functionality is required

• The exact model and revision being supplied

For CCTV projects, also calculate future camera expansion. If eight cameras are required today but the installation may soon grow beyond eight PoE endpoints, purchasing a larger switch from the start may be more economical.

D-Link 8GE PoE+ 2GE Unmanaged PoE Switch Price in Kenya

The D-Link 8GE PoE+ 2GE Unmanaged PoE Switch price in Kenya can change according to stock availability, import and shipment costs, exchange rates and the exact product revision being supplied.

For this reason, buyers should confirm the current selling price rather than relying on an older advertised figure. Visit Tawa for current D-Link networking equipment prices and availability in Kenya before placing an order.

When comparing prices, also confirm that you are comparing the same DGS-F1010P-E model and specifications. Similar D-Link switches may differ in Ethernet speed, number of PoE ports, uplink type and available PoE capacity.

Buy D-Link 8GE PoE+ 2GE Unmanaged PoE Switch in Kenya

The D-Link DGS-F1010P-E 8GE PoE+ 2GE Unmanaged PoE Switch is a strong option for CCTV installers, offices and businesses that need eight Gigabit PoE connections, dedicated Gigabit uplinks and simple plug-and-play deployment. The combination of a 120W PoE budget, IEEE 802.3af/at support and a surveillance-focused Extend mode makes it especially practical for IP camera networks.

Before ordering, confirm the power requirements of your PoE devices, expected cable distances and whether your network needs unmanaged or managed switching. Buyers planning larger surveillance or enterprise deployments should also consider future expansion when deciding how many PoE ports they require.

To buy the D-Link 8GE PoE+ 2GE Unmanaged PoE Switch in Kenya, check the latest price, stock availability and compatible networking accessories from Tawa, your destination for networking equipment in Kenya. Order the correct D-Link DGS-F1010P-E configuration for your CCTV, office or business network and build a cleaner PoE installation with power and Gigabit data delivered through the same network infrastructure.