D Link 52 Port Managed PoE Switch DGS-1210-52MP

The D Link 52 Port Managed PoE Switch DGS-1210-52MP is a high-capacity Gigabit Smart Managed PoE switch designed for business networks, IP surveillance systems, office buildings, hotels, schools, institutions and other installations that require a large number of powered Ethernet connections. It provides 48 Gigabit Ethernet PoE ports together with 4 Gigabit RJ45/SFP combo ports, giving network administrators both high port density and flexible copper or fibre uplink options.

With support for IEEE 802.3af PoE and IEEE 802.3at PoE+, the DGS-1210-52MP can deliver data and electrical power through Ethernet cabling to compatible equipment such as IP cameras, wireless access points and VoIP phones. Its 370W total PoE power budget makes it particularly useful for installations where many powered network devices need to be connected to one centrally managed switch.

The switch also provides managed networking capabilities including VLANs, Quality of Service, link aggregation, Spanning Tree functionality and L2+ static routing. For organisations looking to buy D Link 52 Port Managed PoE Switch DGS-1210-52MP in Kenya, it offers a practical balance between the simplicity of a Smart Managed switch and the control required for larger business networks.

Key Features of D Link 52 Port Managed PoE Switch DGS-1210-52MP

• 48 × 10/100/1000BASE-T Gigabit Ethernet ports

• PoE/PoE+ supported on ports 1–48

• IEEE 802.3af PoE support

• IEEE 802.3at PoE+ support

• Up to 30W PoE capability per supported port, subject to the total available power budget

• 370W total PoE power budget

• 4 × Gigabit RJ45/SFP combo ports

• 104Gbps switching capacity

• Maximum forwarding rate of 77.4Mpps

• 8K MAC address table

• 12Mbit packet buffer

• 128MB DDR3 CPU memory

• 32MB flash memory

• L2+ static routing support

• VLAN management

• Quality of Service functionality

• Link aggregation

• Spanning Tree support

• Energy Efficient Ethernet

• Smart Managed web interface

• Surveillance-oriented management functionality

• Rack-mountable business-network design

48 Gigabit PoE+ Ports

The DGS-1210-52MP provides 48 10/100/1000Mbps RJ45 Ethernet ports, allowing a large number of wired network devices to connect through one switch.

All 48 regular copper ports are PoE capable. This means compatible powered devices can receive both network connectivity and electrical power over the same Ethernet cable.

The switch is therefore particularly suitable for installations involving equipment such as:

• IP surveillance cameras

• Wireless access points

• VoIP phones

• Access-control equipment

• Network intercoms

• Other standards-compliant PoE network devices

Because each connection supports Gigabit Ethernet, the switch provides significantly more bandwidth than older Fast Ethernet PoE switches.

This becomes particularly important when connecting modern access points, high-resolution cameras, network storage devices and other equipment capable of generating substantial network traffic.

370W PoE Power Budget

One of the strongest features of the D Link 52 Port Managed PoE Switch DGS-1210-52MP is its 370W PoE power budget.

The switch supports both 802.3af PoE and 802.3at PoE+, allowing it to work with a wide range of standards-compliant network devices.

PoE+ ports can provide greater power than standard 802.3af PoE ports, making the switch suitable for equipment that requires more power than basic IP phones or low-power cameras.

However, the 370W figure represents the total available PoE budget across the switch.

It does not mean that all 48 ports can simultaneously provide their maximum possible PoE+ output.

For example, a network containing dozens of higher-consumption wireless access points or PTZ cameras may reach the total switch power budget before all 48 ports reach their individual maximum output.

Before purchasing the DGS-1210-52MP for a large PoE installation, calculate the maximum power requirement of all intended powered devices.

Leaving some spare capacity within the PoE budget is also advisable when planning future expansion.

Gigabit Switching Performance

The DGS-1210-52MP has a 104Gbps switching capacity and a maximum forwarding rate of 77.4Mpps.

These specifications make it suitable for high-density Gigabit access networks where many Ethernet devices can be exchanging data simultaneously.

A business network may include computers transferring files, IP cameras continuously streaming video, access points carrying wireless client traffic and IP phones handling calls at the same time.

A high-capacity switch helps move this traffic efficiently between connected ports and uplinks.

The DGS-1210-52MP also uses store-and-forward switching, where Ethernet frames are checked before being forwarded through the network.

Four Gigabit Combo RJ45/SFP Ports

The DGS-1210-52MP includes four Gigabit combo ports.

This is an important specification to understand correctly.

A combo port provides a choice between:

• A Gigabit copper RJ45 interface

or

• A compatible Gigabit SFP interface

The corresponding RJ45 and SFP interfaces are shared, so they should not be counted as eight completely independent additional ports.

This is why the DGS-1210-52MP is described as a 52-port switch:

• 48 standard Gigabit PoE ports

• 4 Gigabit combo interfaces

The SFP option gives network installers useful flexibility when fibre connectivity is required.

Fibre Uplink Capability

Using compatible SFP transceivers, the DGS-1210-52MP can connect to fibre infrastructure.

This can be useful when connecting:

• Different buildings

• Different floors

• Remote network cabinets

• Distribution switches

• Main communications rooms

• Campus network infrastructure

Fibre can also be useful where the distance exceeds the practical limit of copper Ethernet cabling.

The correct SFP module depends on the network design.

Before purchasing an SFP transceiver, confirm:

• Required fibre type

• Single-mode or multimode fibre

• Connector type

• Required distance

• Optical wavelength

• Compatibility with the switch

Do not assume that every SFP transceiver is automatically suitable for every fibre installation.

Businesses planning structured fibre backbones or complex enterprise deployments can use OrbitLink Solutions for professional fibre installation, network design, structured cabling and business networking services.

Smart Managed Networking

The DGS-1210-52MP provides significantly more control than an unmanaged switch.

An unmanaged switch generally connects devices and forwards Ethernet traffic without giving administrators much control over how the network is organised.

A Smart Managed switch adds features that allow administrators to segment traffic, control access, prioritise important applications and monitor network operation.

This makes the DGS-1210-52MP appropriate for organisations where dozens of devices should not simply operate on one unrestricted network.

VLAN Support

VLAN functionality allows administrators to divide the physical network into separate logical network segments.

For example, a single DGS-1210-52MP could carry separate VLANs for:

• Office computers

• IP cameras

• Wireless access points

• VoIP phones

• Servers

• Guest networking

• Network-management equipment

This can improve security and network organisation.

A hotel, for example, could keep CCTV equipment separated from staff computers while simultaneously maintaining a different network segment for guest connectivity.

All of these devices may still physically connect to the same switch while remaining logically separated.

L2+ Static Routing

The DGS-1210-52MP supports L2+ static routing.

Static routing allows the switch to handle selected traffic between different IP networks or VLANs without sending every packet to an upstream router.

This can be useful in business networks where several internal VLANs communicate with one another.

For instance, a network could contain separate VLANs for:

• Administration

• Servers

• CCTV

• VoIP

• Wireless infrastructure

The switch can handle configured routes between selected internal network segments while the primary router continues to handle functions such as Internet connectivity, firewalling, NAT and more advanced routing.

The DGS-1210-52MP should therefore not be treated as a complete replacement for an enterprise router.

Its static-routing functionality is an additional business-network feature rather than a substitute for a dedicated firewall or sophisticated Layer 3 router.

Quality of Service

Quality of Service, or QoS, allows network administrators to prioritise different types of traffic.

This can be particularly useful when a network carries several applications simultaneously.

Examples include:

• VoIP calls

• Video conferencing

• CCTV traffic

• Business applications

• Internet traffic

• File transfers

• Network backups

Voice and video applications can be more sensitive to delay and congestion than ordinary file downloads.

QoS controls can therefore help administrators give important or time-sensitive traffic greater priority when required.

Link Aggregation

The DGS-1210-52MP supports link aggregation.

Link aggregation allows multiple compatible Ethernet connections to operate together as one logical connection.

Depending on the network design, this can be useful for:

• Switch-to-switch uplinks

• Server connections

• Storage systems

• Distribution links

Aggregation can increase combined link capacity and can also provide improved resilience in suitable configurations.

Both connected devices must be configured appropriately for the aggregation method being used.

Spanning Tree Support

Managed networks containing multiple interconnected switches can accidentally create Ethernet loops if redundant connections are not properly controlled.

Network loops can cause broadcast storms and severely disrupt network operation.

The DGS-1210 series provides Spanning Tree functionality designed to prevent this type of Layer 2 loop.

This is particularly useful in larger installations where administrators intentionally create redundant network paths for reliability.

Proper configuration is still essential.

A managed switch does not automatically make a poorly designed network resilient simply because Spanning Tree capability is available.

Surveillance Applications

The DGS-1210-52MP is particularly well suited to IP surveillance installations.

Its combination of:

• 48 PoE-capable Gigabit ports

• 370W PoE budget

• VLAN functionality

• Managed switching

• Gigabit uplinks

• SFP fibre capability

makes it useful for large CCTV deployments.

It can be used to connect compatible cameras across environments such as:

• Hotels

• Schools

• Offices

• Warehouses

• Shopping centres

• Residential developments

• Hospitals

• Commercial compounds

D-Link also provides surveillance-oriented management functionality within the DGS-1210 platform, helping administrators configure networks intended for IP camera deployments.

For larger surveillance systems, remember to consider more than simply the number of camera ports.

The network design should also account for:

• Camera bitrate

• NVR bandwidth

• PoE consumption

• Storage requirements

• Uplink capacity

• Network segmentation

• Fibre distances

Business Wi-Fi Deployments

The switch can also work well as an access-layer switch for business Wi-Fi installations.

Modern wireless access points commonly use PoE so installers do not need to provide a separate electrical outlet beside every ceiling-mounted access point.

The DGS-1210-52MP allows both power and Gigabit connectivity to be delivered over Ethernet.

This can be useful in:

• Hotels

• Office buildings

• Schools

• Hospitals

• Shopping centres

• Conference facilities

• Multi-floor commercial buildings

Administrators can also use VLANs to separate traffic belonging to different SSIDs or network purposes.

For example, staff Wi-Fi and guest Wi-Fi can be placed on separate VLANs even when their access points connect to the same switch.

VoIP Network Deployment

IP phones are another common application for PoE switches.

Instead of using separate power adapters at every desk, compatible phones can receive power directly through their Ethernet connections.

The DGS-1210-52MP is therefore suitable for offices deploying large numbers of PoE VoIP phones alongside ordinary computers and other network equipment.

Managed features such as VLANs and QoS can also help administrators separate and prioritise voice traffic appropriately.

8K MAC Address Table

The switch supports an 8K MAC address table.

A switch uses its MAC address table to keep track of which connected devices are reachable through different Ethernet ports.

An 8K table provides substantial capacity for normal business and institutional access-network environments.

It should not be interpreted as a maximum-user count.

The DGS-1210-52MP is a wired Ethernet switch, and D-Link does not specify it using a simple "maximum number of users" figure.

Actual network capacity depends on the broader network design, traffic patterns, connected equipment and upstream infrastructure.

Memory and Packet Buffer

D-Link's Rev. F documentation lists:

• 128MB DDR3 CPU memory

• 32MB flash memory

• 12Mbit packet buffer

These are internal switch specifications rather than indicators of application performance in the same way RAM and storage might be considered on a computer.

The packet buffer temporarily stores network packets when traffic cannot immediately be forwarded through an outgoing interface.

The size of the buffer is therefore one part of the overall switching architecture.

Energy Efficient Ethernet

The DGS-1210-52MP supports IEEE 802.3az Energy Efficient Ethernet.

EEE is intended to reduce the energy used by Ethernet interfaces during periods of low network activity.

This is useful for network equipment expected to remain powered continuously.

However, actual switch power consumption varies significantly according to:

• Number of active ports

• PoE load

• Connected equipment

• Traffic levels

• Hardware revision

• Operating environment

A heavily loaded 48-port PoE switch powering many devices will naturally consume substantially more electricity than the same switch operating with little or no PoE load.

Best Uses for D Link 52 Port Managed PoE Switch DGS-1210-52MP

The DGS-1210-52MP is best suited to applications requiring many Gigabit network connections and substantial PoE capability.

Typical applications include:

Large CCTV Systems

The 48 PoE ports make it a strong option for installations with many compatible IP cameras.

Business Wireless Networks

Multiple PoE access points can be powered and connected centrally.

Corporate Offices

Computers, phones, printers, access points, surveillance equipment and other devices can connect through one high-density access switch.

Hotels

A hotel network can combine access points, phones, security cameras and back-office systems while using VLANs to keep different services organised.

Schools and Universities

The switch can support classroom connectivity, access points, IP cameras, administrative systems and other campus networking equipment.

Hospitals and Institutions

High port density and managed networking features make it suitable for structured Ethernet installations in larger facilities.

Multi-Floor and Multi-Building Networks

Compatible SFP modules allow fibre uplinks to be incorporated into a larger network design.

Who Should Buy D Link 52 Port Managed PoE Switch DGS-1210-52MP?

The DGS-1210-52MP is suitable for buyers who need more than a basic unmanaged PoE switch.

It is particularly appropriate for:

• IT departments

• Network administrators

• CCTV installers

• System integrators

• Hotels

• Schools

• Universities

• Hospitals

• Corporate offices

• Property developments

• Warehouses

• Business campuses

• Enterprise networking projects

It is especially attractive where one switch must connect a large number of powered endpoints.

However, the DGS-1210-52MP may be more capacity than necessary for a small office requiring only eight or sixteen Ethernet connections.

Likewise, networks requiring 10Gbps SFP+ uplinks, sophisticated dynamic routing or advanced data-centre switching should consider a higher-performance switch platform.

D Link DGS-1210-52MP vs DGS-1210-52MP/ME

Buyers should pay attention to the complete model number.

The standard DGS-1210-52MP and DGS-1210-52MP/ME are not automatically interchangeable.

The /ME designation refers to a different Metro Ethernet product variant, and its hardware specifications and physical design should not simply be copied to the standard DGS-1210-52MP.

This product description specifically targets:

D-Link DGS-1210-52MP

If a supplier is offering the DGS-1210-52MP/ME, confirm its exact specification separately before ordering.

The hardware revision should also be checked because D-Link has released different revisions of products within the DGS-1210 family over time.

What to Check Before Buying

Before buying the DGS-1210-52MP, confirm that its specifications match the planned installation.

Calculate Your PoE Load

Add the maximum expected power consumption of every connected PoE device.

Ensure that the combined requirement remains within the switch's available PoE budget.

Confirm Hardware Revision

Check the hardware revision on the supplied unit.

Certain firmware capabilities and physical specifications can vary between revisions or regional versions.

Confirm Your Uplink Requirements

The switch provides Gigabit combo uplinks.

If your network requires 10Gbps SFP+ uplinks, this model may not be the right choice.

Check SFP Compatibility

When using fibre, confirm the correct SFP transceiver for the required distance and fibre type.

Check Rack and Power Requirements

Ensure sufficient rack space, ventilation and reliable electrical power are available.

A suitable UPS is strongly recommended for critical networking and surveillance installations.

Plan Network Growth

Consider how many ports will remain available after the initial installation.

Buying a 48-port switch when 47 ports will immediately be occupied leaves very little room for future expansion.

D Link 52 Port Managed PoE Switch DGS-1210-52MP Price in Kenya

The D Link 52 Port Managed PoE Switch DGS-1210-52MP price in Kenya can change according to stock availability, exchange rates, international shipping costs and the specific hardware revision available from suppliers.

The total cost of a deployment can also depend on additional equipment such as:

• SFP transceivers

• Fibre patch cords

• Cat6 cable

• Patch panels

• Network racks

• Cable managers

• UPS equipment

• Access points

• Cameras

• NVR systems

Because pricing changes, a fixed Kenya selling price should not be assumed without checking current stock.

Visit Tawa to check the latest DGS-1210-52MP price in Kenya, availability and compatible networking accessories.

Recommended Accessories

A complete installation may require more than the switch itself.

Depending on the project, useful accessories may include:

• Cat6 Ethernet cable

• Cat6 patch cords

• Patch panels

• Cable managers

• Network rack cabinets

• Compatible Gigabit SFP modules

• Fibre patch cords

• Fibre termination equipment

• UPS systems

• Routers

• Wireless access points

• IP cameras

• Network video recorders

You can shop for compatible networking products and accessories from Tawa when planning the complete installation.

For larger enterprise, fibre, structured-cabling or ISP network deployments, OrbitLink Solutions can assist with professional network design, installation, fibre deployment and business-network infrastructure.

Buy D Link 52 Port Managed PoE Switch DGS-1210-52MP in Kenya

The D Link 52 Port Managed PoE Switch DGS-1210-52MP is a strong choice for organisations that require a large number of Gigabit PoE connections together with useful network-management capabilities. Its 48 PoE-capable Gigabit ports, four combo Gigabit RJ45/SFP interfaces, 370W PoE budget and L2+ functionality make it particularly suitable for CCTV, wireless access points, VoIP, office networks and institutional deployments.

Before ordering, confirm the hardware revision, required PoE load, uplink capacity and any SFP modules needed for the installation. Buyers should also make sure they are purchasing the standard DGS-1210-52MP rather than assuming specifications from the separately listed DGS-1210-52MP/ME variant.

To buy D Link 52 Port Managed PoE Switch DGS-1210-52MP in Kenya, visit Tawa for the latest price, stock availability and compatible accessories. Tawa is the main buying destination for the switch and the additional networking equipment required to complete your installation.