D-Link DGS-1210-28P 28-Port Gigabit Smart Managed PoE Switch

The D-Link DGS-1210-28P 28-Port Gigabit Smart Managed PoE Switch is a business-class network switch designed for offices, schools, hotels, surveillance systems, wireless networks and other installations that need Gigabit Ethernet, Power over Ethernet and managed network controls in one device. It combines 24 Gigabit PoE-capable Ethernet ports with four Gigabit RJ45/SFP combo interfaces, giving network administrators flexibility for both copper and fibre uplinks.

For businesses deploying IP cameras, wireless access points, VoIP phones and other compatible powered devices, the DGS-1210-28P can simplify installation by delivering both network connectivity and electrical power over Ethernet cabling. The switch supports IEEE 802.3af PoE and IEEE 802.3at PoE+, with an official total PoE power budget of 193W for the current DGS-1210-28P configuration.

The switch also provides Smart Managed networking capabilities including VLANs, Quality of Service, link aggregation, spanning-tree functionality, IGMP snooping, access-control features and Layer 2+ static routing. This makes the D-Link 28 Port Gigabit Smart Managed PoE Switch a good choice for organisations that need more network control than an unmanaged switch provides without necessarily requiring a high-end enterprise switching platform.

Key Features of D-Link DGS-1210-28P

• 24 × 10/100/1000BASE-T Gigabit Ethernet ports

• PoE and PoE+ available on ports 1–24

• IEEE 802.3af and IEEE 802.3at support

• 193W total PoE power budget

• 4 × Gigabit RJ45/SFP combo ports

• 56 Gbps switching capacity

• Up to 41.7 Mpps forwarding rate for 64-byte packets

• 8K MAC address table

• 4.1 Mbit packet buffer

• Store-and-forward switching

• Auto MDI/MDIX on supported copper ports

• IEEE 802.3az Energy Efficient Ethernet

• Advanced Layer 2 switching functionality

• Layer 2+ static routing

• VLAN support

• Quality of Service

• Link aggregation

• Spanning Tree Protocol support

• IGMP snooping

• Access Control Lists

• 802.1X authentication support

• Standard and Surveillance Mode management interfaces

24 Gigabit PoE Ports

The DGS-1210-28P provides 24 Gigabit Ethernet ports capable of supplying PoE+, allowing compatible network equipment to receive power and data through the same Ethernet cable.

This makes the switch particularly useful for installations involving:

• IP surveillance cameras

• Wireless access points

• VoIP phones

• PoE-enabled network equipment

• Other IEEE 802.3af or 802.3at powered devices

Using PoE can reduce the need to install separate electrical outlets close to every network endpoint. An access point mounted on a ceiling or a camera installed high on a wall, for example, can receive power directly from the switch through compatible structured Ethernet cabling.

The switch's total PoE budget must still be considered when designing the network. Although all 24 primary ports support PoE, the combined power consumption of connected devices must remain within the switch's available 193W PoE budget.

193W PoE Power Budget

D-Link specifies a 193W PoE power budget for the DGS-1210-28P.

This figure represents the total amount of PoE power available for distribution to compatible devices connected across ports 1 through 24. It should not be interpreted as meaning that all 24 ports can simultaneously supply the maximum output permitted by the PoE+ standard.

Before purchasing the switch for a large CCTV or wireless deployment, calculate the maximum power requirement of each connected device. Devices such as standard IP phones may consume relatively little power, while high-performance wireless access points, PTZ cameras or other advanced PoE equipment may consume substantially more.

Leaving some spare PoE capacity is also sensible if more equipment may be added later.

Gigabit Network Performance

The D-Link DGS-1210-28P is built around Gigabit Ethernet connectivity, making it suitable for modern business networks where large amounts of data may be moving between computers, network storage, servers, access points, cameras and internet gateways.

D-Link specifies a 56 Gbps switching capacity and a maximum 64-byte packet forwarding rate of approximately 41.7 million packets per second.

These specifications provide sufficient switching capacity for a broad range of office, surveillance, hospitality and institutional applications.

Actual application performance will also depend on other parts of the network, including the router, internet connection, structured cabling, connected devices, server performance and network configuration.

Four Gigabit RJ45/SFP Combo Ports

In addition to its 24 primary Gigabit PoE ports, the DGS-1210-28P provides four Gigabit RJ45/SFP combo ports.

These combo ports give administrators flexibility when connecting the switch to other network infrastructure. Copper Gigabit Ethernet can be used where normal twisted-pair cabling is appropriate, while compatible SFP transceivers can provide fibre connectivity where required.

Fibre uplinks are especially useful when connecting:

• Network cabinets in different parts of a building

• Multiple floors

• Separate office blocks

• Remote equipment rooms

• Other compatible switches

• Fibre backbone infrastructure

The term combo port is important. The corresponding copper and SFP interfaces share the same logical port resources and should not be counted as separate additional active ports.

SFP transceivers should be selected separately according to the fibre type, wavelength, connector and transmission distance required by the installation.

For larger business networks, structured cabling and fibre deployments, professional installation and network design can be handled through OrbitLink Solutions.

Smart Managed Network Control

The DGS-1210-28P provides significantly more network control than a basic unmanaged switch.

Rather than simply forwarding Ethernet traffic with no administrative control, the switch allows a network administrator to configure important Layer 2 and management features.

This makes it suitable for businesses that need to separate departments, prioritise traffic, manage uplinks, control connected devices or troubleshoot network problems.

Its Smart Managed design is particularly useful for SMEs and organisations that require practical network management without necessarily deploying a complex enterprise switching platform.

VLAN Support

VLAN support allows network administrators to divide one physical switch into several logical network segments.

For example, the same DGS-1210-28P could be configured so that different groups of ports or devices belong to separate VLANs for:

• Staff computers

• Guest Wi-Fi

• CCTV cameras

• VoIP phones

• Network management

• Wireless access points

• Servers or internal resources

Separating network traffic into VLANs can improve organisation and help form part of a wider network-security strategy.

VLANs themselves do not replace a firewall. Appropriate routing, firewall rules and access-control policies are still required when traffic needs to move securely between network segments.

Layer 2+ Static Routing

D-Link lists Layer 2+ static routing among the capabilities of the DGS-1210 Series.

Static routing can allow the switch to handle certain routing functions between configured IP networks without sending every routing decision to another device.

This can be useful in relatively straightforward network environments requiring basic inter-VLAN routing.

However, the DGS-1210-28P should not automatically be treated as a replacement for a dedicated business router or firewall. Functions such as internet gateway security, NAT, advanced VPN services, sophisticated dynamic routing and threat protection normally require suitable dedicated network equipment.

Quality of Service

Quality of Service helps administrators prioritise important traffic.

In a business network, not every type of data has the same sensitivity to congestion. Voice calls and some video applications, for example, can be affected quickly by delay and packet loss, while ordinary file downloads can usually tolerate some variation.

QoS capabilities can therefore be useful when the DGS-1210-28P is supporting:

• VoIP telephony

• Video conferencing

• Business applications

• Surveillance traffic

• Other latency-sensitive services

Correct QoS configuration still depends on the wider network design and the priorities of the organisation.

Link Aggregation

The DGS-1210 Series supports link aggregation functionality.

Link aggregation allows compatible interfaces to be grouped into a logical connection when the connected equipment and network design also support the feature.

Depending on the configuration, this can be useful for increasing aggregate bandwidth between compatible network devices or introducing additional connection resilience.

Typical uses can include switch-to-switch uplinks and connections to compatible servers or network infrastructure.

Spanning Tree Support

Ethernet switching networks can experience serious problems when physical loops are created without appropriate network controls.

The DGS-1210 Series supports spanning-tree functionality designed to help network administrators build more resilient switched networks while controlling unwanted Layer 2 loops.

This is particularly important in environments containing several interconnected switches or redundant network links.

IGMP Snooping

The switch also supports IGMP snooping, which is useful in networks carrying multicast traffic.

Without appropriate multicast management, multicast streams may be forwarded to network ports that do not need them. IGMP snooping allows the switch to make more intelligent forwarding decisions for multicast traffic.

This capability can be particularly relevant to networks carrying IPTV or other multicast-based applications.

Network Security Features

The DGS-1210-28P includes managed-switch security functionality intended to give administrators greater control over access to the network.

Supported features include mechanisms such as:

• Access Control Lists

• 802.1X authentication

• Port security capabilities

• Network traffic controls

• D-Link Safeguard Engine functionality

802.1X can be used as part of an authenticated network-access environment when integrated with the appropriate authentication infrastructure.

These switching features should form part of a wider security approach rather than being treated as replacements for firewalls, endpoint protection, secure passwords, firmware maintenance and proper network administration.

Surveillance Mode

D-Link provides an optional Surveillance Mode management interface on the DGS-1210-28P.

This can make network administration more convenient in environments where the switch is primarily being used for IP surveillance infrastructure.

A CCTV installation may contain numerous cameras, network uplinks and recording equipment, making visibility into port status and network behaviour useful during installation and troubleshooting.

The DGS-1210-28P is still a network switch. It does not replace an NVR, surveillance server or video-management platform.

Its role is to provide network connectivity, PoE power and switching functionality for compatible network devices.

Energy Efficient Ethernet

The DGS-1210 Series supports IEEE 802.3az Energy Efficient Ethernet.

Energy Efficient Ethernet is designed to reduce power usage on compatible Ethernet links during periods of lower network activity.

The practical savings in a specific deployment will depend on the connected devices, number of active ports, traffic patterns and other operating conditions.

Best Uses for D-Link DGS-1210-28P

The D-Link DGS-1210-28P 28-Port Gigabit Smart Managed PoE Switch is suitable for many professional networking applications.

Common deployment scenarios include:

• Office networks

• Business Wi-Fi installations

• CCTV surveillance systems

• Schools and colleges

• Hotels

• Hospitals and clinics

• Retail stores

• Warehouses

• Apartment buildings

• VoIP networks

• Corporate branches

• Network cabinets

• Structured cabling projects

• Fibre-backbone deployments

• SME business networks

Its combination of PoE, Gigabit connectivity, SFP flexibility and managed switching features makes it particularly useful where several different types of network equipment need to operate through the same infrastructure.

Who Should Buy D-Link DGS-1210-28P?

The DGS-1210-28P is a good option for businesses that need more capability than a simple unmanaged 24-port switch.

It is particularly appropriate when a network requires a combination of powered Ethernet devices and administrative control.

A business installing access points, cameras and VoIP phones, for example, can connect those devices through one central PoE switch while also using VLANs and other management features to organise the network.

Network installers may also find the fibre-capable combo ports useful where the access switch needs to connect to a fibre backbone or another building.

Businesses with very large PoE requirements should calculate power consumption carefully before ordering because the DGS-1210-28P has a 193W total PoE budget. D-Link offers other switch configurations with different PoE capacities, so the exact model should always be confirmed.

D-Link DGS-1210-28P Price in Kenya

The D-Link DGS-1210-28P price in Kenya can vary depending on stock availability, exchange rates, international shipment costs and supplier pricing.

The exact hardware revision supplied can also matter because D-Link has released different revisions of products within the DGS-1210 family over time.

For this reason, a fixed Kenya price should not be assumed unless it has been confirmed from current stock.

Check Tawa for the latest D-Link DGS-1210-28P price in Kenya, current availability and compatible networking accessories.

What to Check Before Buying

Before ordering the D-Link DGS-1210-28P, confirm the details of your deployment.

Important points include:

• Exact model: Confirm that you are buying the DGS-1210-28P.

• Hardware revision: Confirm the revision if specific firmware or project requirements apply.

• PoE budget: Calculate the total maximum power requirement of connected PoE devices.

• Port quantity: Confirm that 24 primary Gigabit PoE ports are sufficient.

• Fibre requirements: Determine whether SFP uplinks will be needed.

• SFP compatibility: Choose compatible transceivers according to fibre type and transmission distance.

• VLAN requirements: Plan network segmentation before installation where necessary.

• Uplink capacity: Consider the traffic expected between the switch and the wider network.

• Accessories: Confirm separately whether SFP modules, patch cords and other installation accessories are required.

For professional business networking, fibre installation and structured cabling projects, OrbitLink Solutions can assist with network planning and deployment where required.

Buy D-Link DGS-1210-28P in Kenya

The D-Link DGS-1210-28P 28-Port Gigabit Smart Managed PoE Switch is a practical choice for organisations that need Gigabit Ethernet, managed switching and PoE+ connectivity in one rack-mountable network platform. Its 24 PoE-capable Gigabit ports can support compatible IP cameras, access points, VoIP phones and other powered devices, while the four RJ45/SFP combo interfaces provide useful flexibility for network uplinks.

Its 193W PoE budget, 56 Gbps switching capacity, VLAN support, QoS, static routing, link aggregation, security functionality and Surveillance Mode make it suitable for business, hospitality, education, CCTV and other professionally managed network environments. Before ordering, confirm the exact model and hardware revision, calculate the required PoE budget and determine whether additional SFP transceivers or installation accessories are needed.

To buy the D-Link DGS-1210-28P in Kenya, visit Tawa to check the latest price, availability and compatible networking accessories. Choose Tawa when shopping for the D-Link 28 Port Gigabit Smart Managed PoE Switch in Kenya and other networking equipment for your installation.