D Link 16 Port Gigabit Managed PoE Switch

The D Link 16 Port Gigabit Managed PoE Switch, model DGS-F1210-18PS-E, is a Layer 2 managed PoE+ network switch designed for businesses, CCTV installations, wireless networks and other professional deployments that require both Gigabit connectivity and Power over Ethernet. It combines 16 Gigabit PoE RJ45 ports with 2 Gigabit SFP uplink ports, allowing businesses to power compatible network devices while maintaining fast data connections and flexible fibre uplinks.

This switch is particularly useful for installations involving IP cameras, wireless access points, VoIP equipment and other IEEE 802.3af or 802.3at compatible devices. By delivering network data and electrical power through the same Ethernet cable, it can reduce the need for separate power adapters at individual device locations and simplify structured network installations.

For Kenyan businesses, CCTV installers, network technicians, schools, hotels, warehouses and commercial properties, the DGS-F1210-18PS-E provides a practical combination of PoE+, Gigabit switching, network management and long-range connectivity. Customers looking to buy D Link 16 Port Gigabit Managed PoE Switch in Kenya can source the switch and compatible networking accessories from Tawa.

Key Features of D Link 16 Port Gigabit Managed PoE Switch

• Model: D-Link DGS-F1210-18PS-E

• 16 × 10/100/1000 Mbps Gigabit RJ45 PoE ports

• 2 × Gigabit SFP uplink ports

• Layer 2 managed switching

• Supports IEEE 802.3af and IEEE 802.3at PoE/PoE+

• Maximum PoE output of up to 30W on an individual compatible port

• Long-range PoE transmission of up to 250 metres on ports 1–8 in Extend mode

• 36 Gbps switching capacity

• 26.8 Mpps packet forwarding rate

• 8K MAC address table

• Store-and-forward switching

• RJ45 console port

• VLAN operating mode

• QoS operating mode

• Extend operating mode

• PoE management mode

• Auto-negotiation

• Auto MDI/MDIX

• IEEE 802.3x flow control

• 6kV surge/lightning protection specification

• 100–240V AC, 50/60Hz power input

• Dimensions of approximately 440 × 180 × 44 mm

• Approximate weight of 2.3 kg

• Suitable for rack-based professional network installations

16 Gigabit PoE Ports for Professional Networks

The DGS-F1210-18PS-E provides 16 Gigabit Ethernet RJ45 ports, giving businesses sufficient connectivity for medium-sized surveillance, office and wireless-network deployments.

Each Ethernet port supports 10/100/1000 Mbps operation, meaning the switch can communicate with compatible devices running at different Ethernet speeds while providing Gigabit capability for equipment that supports it.

The 16 RJ45 ports also provide Power over Ethernet functionality.

This allows compatible powered devices to receive both network connectivity and electrical power through a single Ethernet cable.

Typical PoE devices that may be connected include:

• IP surveillance cameras

• Wireless access points

• VoIP phones

• PoE network devices

• Compatible security equipment

• Other IEEE 802.3af or IEEE 802.3at powered devices

This can make installations considerably cleaner because electrical sockets do not necessarily need to be installed beside every network endpoint.

IEEE 802.3af and 802.3at PoE+ Support

The D Link 16 Port Gigabit Managed PoE Switch supports both IEEE 802.3af PoE and IEEE 802.3at PoE+ standards.

IEEE 802.3af is commonly used by lower-power network equipment, while IEEE 802.3at provides additional power for compatible devices that require higher power levels.

D-Link specifies a maximum PoE output of up to 30 watts per compatible port.

However, buyers should understand the difference between the maximum power available to an individual port and the total PoE power available across the complete switch.

Official D-Link documentation for different markets lists different total PoE budgets for the DGS-F1210-18PS-E. Because of these regional or hardware-revision differences, customers should confirm the exact total PoE budget of the unit being supplied before designing an installation that will operate many high-power devices simultaneously.

When ordering from Tawa, confirm the available hardware revision and PoE capacity if your installation has demanding power requirements.

Long-Range PoE up to 250 Metres

One of the most useful features of the DGS-F1210-18PS-E is its long-range PoE capability.

When Extend mode is activated, D-Link specifies transmission distances of up to 250 metres on ports 1–8, using suitable Cat5 or higher-grade Ethernet cabling.

This is particularly valuable in surveillance installations where cameras may need to be positioned well beyond the conventional Ethernet distance normally associated with standard structured cabling.

Potential applications include:

• Perimeter CCTV cameras

• Warehouse surveillance

• School compounds

• Factory installations

• Parking areas

• Apartment compounds

• Hotel premises

• Farm and estate monitoring

• Large business compounds

• Security cameras positioned far from the equipment room

Actual installation performance can depend on the Ethernet cable, termination quality, connected device and environmental conditions.

For long-distance PoE installations, using good-quality copper Ethernet cable and correct installation practices is important.

2 Gigabit SFP Uplink Ports

In addition to the 16 Gigabit RJ45 PoE ports, the DGS-F1210-18PS-E includes 2 Gigabit SFP ports.

These SFP interfaces provide greater flexibility when integrating the switch with fibre-optic infrastructure.

A fibre uplink can be useful when connecting the PoE switch to:

• A central network switch

• Another building

• A network cabinet located far away

• A fibre backbone

• A data room

• A larger enterprise network

Fibre is particularly useful where the required network link extends farther than normal copper Ethernet or where electrical isolation between buildings is desirable.

The exact SFP module required depends on the fibre type, distance, wavelength and connector configuration being used.

SFP transceivers should therefore be selected separately according to the network design rather than assuming that one module suits every fibre installation.

Customers can check Tawa for compatible SFP modules, fibre patch cords, Ethernet cables and other network accessories required for deployment.

Layer 2 Managed Networking

The DGS-F1210-18PS-E is a managed Layer 2 switch, giving network administrators more control than a basic unmanaged Ethernet switch.

Management functionality becomes important when a business needs to organise connected equipment instead of simply allowing every device to communicate on the same unrestricted network.

A managed switch can be useful for separating different types of network traffic and applying appropriate settings according to the requirements of an installation.

This makes the DGS-F1210-18PS-E suitable for professional networks where administrators require greater visibility and control.

VLAN Mode

The switch includes a dedicated VLAN mode.

VLAN functionality allows network administrators to create logical separation between devices connected to the same switching infrastructure.

For example, an organisation may want to keep surveillance cameras separated from ordinary staff computers or other business equipment.

Logical network separation can help improve organisation and reduce unnecessary interaction between different groups of connected devices.

VLAN configuration is therefore especially useful in:

• CCTV networks

• Office environments

• Hotels

• Schools

• Apartment buildings

• Business networks

• Multi-department installations

For installations involving advanced VLAN planning, fibre backbones, multiple switches or structured cabling, OrbitLink Solutions can be relevant for professional network design and deployment, while Tawa remains the primary destination for purchasing the switch and related equipment.

Quality of Service Mode

The DGS-F1210-18PS-E also provides a QoS mode for traffic prioritisation.

Quality of Service allows certain network traffic to receive priority over less important data.

This can be helpful in networks carrying applications such as surveillance video, voice traffic or other data where stable transmission is important.

In a busy network, appropriate traffic prioritisation can help prevent important applications from competing equally with less time-sensitive traffic.

PoE Management Mode

D-Link also provides a dedicated PoE operating mode designed to improve management of connected powered devices.

According to D-Link's product information, the switch can detect certain situations in which a powered device has stopped responding and can power-cycle the affected connection.

This capability can be particularly useful in CCTV installations.

A camera installed high on a wall, pole or warehouse structure may be inconvenient to access physically simply to disconnect and reconnect its power.

Remote or automatic power cycling can reduce unnecessary site visits in some situations.

36 Gbps Switching Capacity

D-Link specifies a 36 Gbps switching capacity for the DGS-F1210-18PS-E.

Switching capacity represents the amount of traffic the switching architecture is designed to process internally.

Combined with Gigabit Ethernet interfaces, this makes the unit suitable for applications involving multiple simultaneous wired network connections.

D-Link also specifies a packet-forwarding rate of approximately 26.8 million packets per second.

These specifications make the switch more appropriate for business and surveillance deployments than low-capacity switches designed only for basic home networking.

8K MAC Address Table

The DGS-F1210-18PS-E supports an 8,000-entry MAC address table.

A switch uses MAC addresses to identify connected Ethernet devices and determine where network traffic should be forwarded.

An 8K MAC address table provides plenty of addressing capacity for the type of small-to-medium business, CCTV and professional network deployments for which this switch is designed.

Auto-Negotiation and Auto MDI/MDIX

The Ethernet interfaces support auto-negotiation and Auto MDI/MDIX.

Auto-negotiation allows connected Ethernet devices to negotiate an appropriate supported connection speed and duplex configuration.

Auto MDI/MDIX reduces the need to worry about crossover versus straight-through Ethernet wiring when connecting compatible modern network equipment.

These features make deployment easier, particularly when the switch is being integrated into an existing network with different generations of Ethernet hardware.

6kV Surge Protection Specification

D-Link specifies 6kV surge/lightning protection for the DGS-F1210-18PS-E.

This is especially useful for surveillance and PoE networks because network cables may extend through large buildings or outdoor-facing installations.

However, the switch's built-in protection should not be considered a replacement for a properly designed electrical protection system.

Depending on the installation, a professional deployment may also require:

• Correct earthing

• UPS backup

• External surge protection

• Proper equipment racks

• Suitable patch panels

• Correct outdoor-rated cabling

• Appropriate lightning-protection measures

This is particularly important in environments where cables run between buildings or equipment is exposed to challenging electrical conditions.

Best Uses for D Link 16 Port Gigabit Managed PoE Switch

The DGS-F1210-18PS-E is suitable for many professional networking applications.

CCTV and IP Surveillance

Its 16 PoE ports make it particularly attractive for IP camera deployments.

Cameras can receive power and network connectivity through the same Ethernet cable, while long-range PoE on selected ports provides additional flexibility for larger compounds.

Wireless Access Point Deployments

Businesses deploying multiple compatible PoE access points can use the switch as a central source of both network connectivity and electrical power.

This can help simplify ceiling-mounted or wall-mounted access point installations.

Office Networks

The managed features, Gigabit ports and SFP uplinks make the switch suitable for structured office networks where both ordinary Ethernet devices and PoE equipment need to be connected.

Schools and Institutions

Schools, colleges and institutional campuses can use the switch for surveillance cameras, access points and other network infrastructure.

Hotels and Apartment Developments

Hotels and apartment buildings often require distributed cameras, wireless access points and fibre connections between network cabinets.

The combination of PoE, fibre uplinks and network management makes the DGS-F1210-18PS-E suitable for these environments.

Warehouses and Commercial Premises

Long buildings and large compounds can benefit from the switch's surveillance-focused design and Extend mode on selected ports.

Who Should Buy D Link 16 Port Gigabit Managed PoE Switch?

The D Link 16 Port Gigabit Managed PoE Switch is best suited to customers who need more than a simple unmanaged Ethernet switch.

It is worth considering if your project requires:

• Several PoE devices

• Gigabit Ethernet connectivity

• IP surveillance cameras

• Multiple wireless access points

• Fibre uplinks

• VLAN functionality

• Network traffic prioritisation

• Long-distance PoE

• Professional network management

Typical buyers may include:

• CCTV installers

• IT departments

• Network technicians

• Internet service providers

• Schools

• Hotels

• Businesses

• Property managers

• Warehouses

• Security companies

• Systems integrators

If your requirement is simply connecting a few ordinary computers without PoE or management functionality, a simpler unmanaged Gigabit switch may be more economical.

D Link 16 Port Gigabit Managed PoE Switch Price in Kenya

The D Link 16 Port Gigabit Managed PoE Switch price in Kenya can vary depending on stock availability, exchange rates, shipment costs, hardware revision and accessories supplied with the unit.

A fixed Kenya price should therefore be confirmed at the time of ordering rather than relying on an outdated figure.

Visit Tawa to check the latest DGS-F1210-18PS-E price in Kenya and current stock availability.

The total cost of an installation may also depend on additional equipment such as:

• Cat6 Ethernet cable

• SFP transceivers

• Fibre patch cords

• Patch panels

• Network racks

• UPS equipment

• Surge protectors

• Fibre accessories

• RJ45 connectors

• Cable-management accessories

Tawa can also be used to source compatible networking equipment required to complete the installation.

What to Check Before Buying

Before ordering the DGS-F1210-18PS-E, confirm the requirements of your network rather than selecting a PoE switch based only on the number of ports.

Check the following:

• Confirm the exact model is DGS-F1210-18PS-E

• Confirm the hardware revision supplied

• Confirm the total PoE budget of the specific unit

• Calculate the combined power requirements of your PoE devices

• Confirm whether connected equipment supports 802.3af or 802.3at

• Confirm whether any connections need Extend mode

• Confirm Ethernet cable quality and distance

• Confirm whether fibre uplinks are required

• Select suitable SFP modules where fibre is being used

• Confirm rack and power requirements

• Consider UPS and surge protection for critical installations

The PoE budget is particularly important.

Although a compatible individual port can provide up to 30W, this does not mean all 16 ports can necessarily provide 30W simultaneously.

The total power requirement of all connected powered devices must remain within the total PoE budget of the exact switch version being supplied.

Buy D Link 16 Port Gigabit Managed PoE Switch in Kenya

The D Link 16 Port Gigabit Managed PoE Switch DGS-F1210-18PS-E is a strong option for professional installations requiring Gigabit Ethernet, PoE+, managed networking and fibre uplinks in one device. Its combination of 16 PoE RJ45 ports and two Gigabit SFP ports makes it especially useful for CCTV systems, business Wi-Fi, office networking and structured commercial networks.

Long-range PoE support on ports 1–8 adds extra flexibility for surveillance projects where selected devices need to be positioned farther away, while Layer 2 management features provide greater control than an ordinary unmanaged switch.

Before ordering, confirm the exact hardware revision, total PoE power budget and any SFP modules, Ethernet cables or installation accessories required for your project. To buy D Link 16 Port Gigabit Managed PoE Switch in Kenya, check the latest price, stock availability and compatible networking accessories from Tawa and choose the right equipment for your CCTV, business or enterprise network deployment.