Buy D-Link 24 Port Managed Gigabit Switch

The D-Link DGS-1210-28 24 Port Managed Gigabit Switch is a business-class network switch designed for organisations that need reliable Gigabit Ethernet connectivity together with greater control over their wired network. It is suitable for offices, schools, hotels, institutions, CCTV networks, server rooms, network cabinets and other professional installations where an unmanaged switch may not provide enough flexibility.

The switch provides 24 Gigabit Ethernet ports for connecting computers, routers, servers, network storage, printers, access points, CCTV equipment and other Ethernet devices. It also provides 4 Gigabit RJ45/SFP combo ports, giving network administrators additional flexibility when connecting other switches or extending the network through compatible fibre-optic SFP transceivers.

For businesses looking to buy a D-Link 24 Port Managed Gigabit Switch in Kenya, the DGS-1210-28 is particularly useful when features such as VLANs, Quality of Service, traffic management, link aggregation and static routing are required.

Key Features of D-Link DGS-1210-28

• 24 × 10/100/1000BASE-T Gigabit Ethernet ports

• 4 × Gigabit RJ45/SFP combo ports

• Advanced Layer 2 switching features

• Layer 2+ static routing

• VLAN support

• Quality of Service traffic prioritisation

• Bandwidth control

• Link aggregation support

• Spanning Tree functionality

• IGMP Snooping

• Network access-control and security features

• Web-based management interface

• Compact CLI management support

• Energy Efficient Ethernet support

• Fanless design

• Rackmountable format

• Non-PoE configuration

24 Gigabit Ethernet Ports

The DGS-1210-28 provides 24 10/100/1000BASE-T Ethernet ports, allowing compatible devices to communicate at Gigabit Ethernet speeds.

This makes it suitable for business networks carrying significantly more traffic than older Fast Ethernet installations. Computers, network-attached storage, servers, routers and other Gigabit-capable equipment can take advantage of higher LAN throughput when the rest of the network infrastructure supports Gigabit speeds.

The actual performance available to each connected device will still depend on factors such as cabling quality, connected hardware, network configuration and traffic levels.

Gigabit RJ45/SFP Combo Ports

In addition to the 24 standard Ethernet ports, the DGS-1210-28 has four Gigabit RJ45/SFP combo ports.

These interfaces allow network designers to choose between copper Ethernet and compatible fibre SFP connectivity depending on the deployment.

Fibre connections can be useful for linking:

• separate network cabinets

• different office floors

• buildings within the same compound

• server rooms

• distribution switches

• remote network sections

It is important to understand that these are combo ports. The associated RJ45 and SFP interfaces share the same logical port resources and should not be counted as eight separate simultaneously usable interfaces.

Managed Network Features

The main advantage of the DGS-1210-28 over a basic unmanaged Gigabit switch is network control.

Administrators can configure the switch instead of simply connecting every device to one unrestricted LAN. This makes it much more suitable for structured commercial networks.

Managed functionality can help businesses separate departments, control network traffic, prioritize critical applications and maintain a more organised network infrastructure.

For larger installations that require structured cabling, fibre deployment or professional network design, businesses can work with OrbitLink Solutions for enterprise networking and network installation.

VLAN Support

The DGS-1210 series supports VLAN configuration, allowing devices connected to the same physical switch to be separated into different logical networks.

A business could, for example, maintain separate VLANs for:

• employees

• management

• CCTV cameras

• guest connectivity

• servers

• VoIP systems

• different departments

Proper VLAN configuration can improve organisation and security by restricting unnecessary communication between different sections of a network.

The router or firewall used with the switch must also be configured correctly where communication between VLANs or internet access is required.

Layer 2+ Static Routing

The DGS-1210-28 supports Layer 2+ static routing.

This allows the switch to perform certain routing functions between configured IP networks rather than relying entirely on an external router for every local routing decision.

Static routing can be useful in segmented business networks, particularly where multiple VLANs are used.

However, the DGS-1210-28 should not be treated as a replacement for a dedicated internet router, firewall or full-featured Layer 3 enterprise routing platform.

Quality of Service

The switch supports Quality of Service, commonly known as QoS.

QoS allows selected network traffic to be prioritised over less important traffic. This can be beneficial for business environments running applications such as voice services, video, surveillance systems or other latency-sensitive traffic.

QoS does not increase the speed of your internet connection. Instead, it helps determine how available network resources are prioritised.

Bandwidth Control

Bandwidth-control features give administrators more control over traffic passing through switch ports.

This can be useful in environments where administrators want to prevent individual connections or applications from consuming excessive network resources.

The appropriate configuration will depend on how the organisation uses its network and what applications need priority.

Link Aggregation

The DGS-1210 series supports link aggregation, allowing compatible Ethernet links to be grouped where supported by equipment at both ends.

Link aggregation can be useful for switch-to-switch connections, servers or other equipment that supports aggregated interfaces.

It can provide additional combined bandwidth and may also contribute to network resiliency depending on the way the network is designed.

IGMP Snooping

The switch supports IGMP Snooping for more efficient handling of multicast traffic.

Multicast is commonly associated with services such as IPTV and certain types of video distribution.

Instead of forwarding multicast traffic unnecessarily across every switch port, IGMP Snooping can help direct it only toward the devices that have requested it.

This can reduce unnecessary traffic within the LAN.

Spanning Tree Support

D-Link includes Spanning Tree functionality in the DGS-1210 platform.

Spanning Tree is important in networks where multiple switch connections could accidentally create Ethernet loops. A network loop can generate large amounts of unwanted traffic and seriously disrupt network operation.

Correctly configured Spanning Tree functionality helps provide protection against these situations.

Network Security and Access Control

Managed switches provide significantly more security functionality than basic unmanaged switches.

The DGS-1210 series supports features including access controls, IEEE 802.1X authentication and other Layer 2 security functions depending on the configuration and firmware revision.

These tools can help administrators control which devices are allowed to connect and how different sections of the network interact.

The switch is only one part of a secure network. Proper security should also include an appropriately configured router or firewall, secure wireless networks, device authentication and good network administration practices.

Suitable for CCTV Networks

The D-Link DGS-1210-28 can be useful in managed CCTV environments, particularly where cameras, recording systems and ordinary office devices need to be separated using VLANs.

For example, CCTV traffic can be placed on a dedicated surveillance VLAN instead of operating on the same unrestricted network segment used by employee computers.

D-Link also provides surveillance-oriented management features within the DGS-1210 family.

However, there is an important buying consideration:

The standard DGS-1210-28 is not a PoE switch.

It therefore should not be purchased on the assumption that it can directly power PoE IP cameras, wireless access points or VoIP phones.

If your installation requires power and network connectivity from the same Ethernet cable, consider an appropriate D-Link PoE model and verify the required PoE standard and power budget before purchasing.

Fanless Operation

The DGS-1210-28 is listed by D-Link as a fanless switch.

Fanless operation is beneficial in offices, reception areas and other environments where network-equipment noise needs to be kept low.

It also removes reliance on an internal mechanical fan during normal operation.

The switch should still be installed in an adequately ventilated location. Network cabinets should not be allowed to become excessively hot.

Energy Efficient Ethernet

The DGS-1210 series supports IEEE 802.3az Energy Efficient Ethernet.

Energy Efficient Ethernet is designed to reduce unnecessary power consumption on Ethernet links during periods of lower activity.

For organisations operating network equipment continuously, power-efficiency features can contribute to a more efficient infrastructure.

Actual power consumption depends on the switch configuration, number of active ports and operating conditions.

Fibre Connectivity

The SFP capability of the DGS-1210-28 makes the switch useful in networks that combine copper Ethernet connections with fibre uplinks.

The SFP module determines important characteristics of the fibre connection.

Before purchasing an SFP transceiver, check:

• SFP compatibility

• required transmission distance

• single-mode or multimode fibre

• optical wavelength

• connector type

• required network speed

• compatibility of the equipment at the opposite end

Do not assume that an SFP slot automatically provides a particular fibre distance or wavelength.

For business fibre installations, structured cabling and network design, OrbitLink Solutions can assist with professional network deployment.

Best Uses for D-Link DGS-1210-28

The D-Link 24 Port Managed Gigabit Switch is well suited to:

• Business office networks

• Schools and colleges

• Hotels

• Hospitals and institutions

• Retail environments

• CCTV networks

• Server rooms

• Network cabinets

• Structured cabling installations

• Multi-floor buildings

• ISP supporting infrastructure

• Fibre-connected network sections

• Organisations upgrading from unmanaged switches

Its combination of Gigabit Ethernet, VLAN management and fibre-capable combo interfaces makes it suitable for growing networks that require more control than a basic unmanaged switch can provide.

Who Should Buy D-Link DGS-1210-28?

The DGS-1210-28 is suited to businesses and organisations that need a professionally managed wired network.

It is particularly useful for network technicians, IT administrators, system integrators and businesses that need VLANs, network segmentation, QoS, multicast management, fibre uplinks or static routing.

It can also be a good upgrade for an organisation currently using multiple small unmanaged switches and looking to move toward a more structured network.

For very small networks where there is no need for VLANs, monitoring, traffic management or other managed functions, a basic unmanaged Gigabit switch may be sufficient.

D-Link DGS-1210-28 vs Unmanaged Switch

A standard unmanaged switch mainly provides Ethernet connectivity.

The DGS-1210-28 adds management capabilities that allow administrators to configure how the network operates.

This includes features such as:

• VLAN segmentation

• QoS

• traffic management

• static routing

• link aggregation

• multicast management

• security controls

• network monitoring

This additional functionality makes the switch better suited to business environments, but it also means correct configuration is important.

Is the D-Link DGS-1210-28 PoE?

No. The standard DGS-1210-28 is the non-PoE version.

D-Link sells separate PoE models in the DGS-1210 range, including models such as the DGS-1210-28P and DGS-1210-28MP.

This distinction is especially important when purchasing a switch for:

• IP cameras

• wireless access points

• VoIP phones

• other PoE-powered devices

If PoE is required, confirm the exact switch model, supported IEEE PoE standard and total PoE power budget before ordering.

D-Link 24 Port Managed Gigabit Switch Price in Kenya

The D-Link 24 Port Managed Gigabit Switch price in Kenya can vary depending on stock availability, exchange rates, international shipping costs, hardware revision and the exact D-Link model being supplied.

Tawa should therefore confirm the current selling price rather than relying on a fixed figure that may later become inaccurate.

Check Tawa for the latest D-Link networking equipment prices and availability in Kenya.

Buyers should also confirm whether their installation requires additional equipment such as SFP modules, patch cords, Cat6 cable, patch panels, network racks or fibre accessories.

What to Check Before Buying

The most important step before ordering is confirming the exact model number.

The phrase “D-Link 24 Port Managed Gigabit Switch” can refer to more than one D-Link product, and specifications vary between models.

If you are purchasing the DGS-1210-28, confirm that you require:

• 24 Gigabit Ethernet access ports

• four Gigabit RJ45/SFP combo interfaces

• managed Layer 2 networking

• static routing

• non-PoE operation

Also check whether your project requires PoE, 10 Gigabit uplinks, dedicated SFP ports rather than combo interfaces, advanced Layer 3 routing or other features that may require a different switch.

Buy D-Link 24 Port Managed Gigabit Switch in Kenya

The D-Link DGS-1210-28 24 Port Managed Gigabit Switch is a strong option for businesses that need Gigabit Ethernet connectivity combined with network-management capabilities such as VLANs, QoS, link aggregation, multicast management and static routing.

Its 24 Gigabit Ethernet ports and four Gigabit RJ45/SFP combo interfaces make it particularly useful for offices, institutions, CCTV networks, server rooms and structured business networks that may need both copper and fibre connectivity.

Before ordering, confirm that the product being supplied is specifically the DGS-1210-28 and that the non-PoE configuration matches your requirements. Also confirm whether SFP modules, Ethernet cabling, rack accessories or other networking components are required separately.

For the latest D-Link 24 Port Managed Gigabit Switch price in Kenya, current stock and compatible networking accessories, buy from Tawa.