1 Port Network Faceplate

The 1 Port Network Faceplate provides a neat finishing point for a single network connection in a structured cabling installation. It is designed for locations where one data outlet is required, helping installers create a cleaner and more professional network point instead of leaving permanent cabling exposed.

A single-port network faceplate is suitable for homes, offices, schools, shops, hotels and other buildings using structured Ethernet cabling. Depending on the specific model, the faceplate is typically used with a compatible network module or keystone jack that forms the actual data connection.

For buyers installing a new network or replacing an existing wall outlet, the 1 Port Network Faceplate is a simple but important part of a properly finished cabling system. Customers can check availability and compatible networking accessories from Tawa.

Key Features of 1 Port Network Faceplate

• Single opening for one compatible network outlet

• Designed for structured network cabling installations

• Creates a cleaner wall termination for network cabling

• Suitable for home, office and commercial network installations

• Useful for new cabling installations and replacement projects

• Can be used at individual workstation or equipment locations

• Helps protect and organize the permanent cable termination

• Intended for use with compatible network termination components

• Suitable for professional structured cabling layouts

• Simple solution where only one permanent network point is required

Exact dimensions, construction material, colour, mounting format and included components depend on the specific faceplate supplied. These details should therefore be confirmed on the current Tawa listing before ordering.

Single Network Outlet for Structured Cabling

The primary purpose of a 1 Port Network Faceplate is to provide one finished connection point at the end of a structured cabling run.

In a typical network installation, permanent Ethernet cable is routed through conduit, trunking, ceiling space or another protected pathway. At the destination, the cable is terminated to an appropriate network module, which is then presented neatly at the wall through the faceplate.

This arrangement creates a more permanent and professional installation than allowing the network cable itself to hang directly from the wall.

It is especially useful in buildings where computers, IP phones, printers, televisions, network equipment or other Ethernet devices need fixed network points.

Faceplate and Network Jack Are Different Components

It is important to understand that the faceplate itself is generally a mounting and finishing component.

The network jack or module fitted into the faceplate is the component that provides the actual network connection.

For that reason, customers should not assume that a product described as a 1 Port Network Faceplate automatically includes:

• An RJ45 keystone jack

• A Cat5e jack

• A Cat6 jack

• A back box

• Mounting screws

• Patch cable

• Network cable

• Other installation accessories

Package contents depend on the particular product being sold.

Before ordering from Tawa, confirm whether you are purchasing the faceplate only or a complete outlet consisting of both a faceplate and network module.

Network Category and Performance

A passive faceplate should not be treated as the component that determines Ethernet speed.

The performance of a structured cabling connection depends on the complete channel, including components such as:

• Network cable

• Keystone jack or network module

• Patch panel

• Patch cords

• Termination quality

• Installation practices

If you are installing a Cat6 network, for example, the relevant cable, jack, patch panel and patch cords should be selected appropriately for that cabling system.

The presence of a faceplate alone does not prove that the finished outlet is Cat5e, Cat6, Cat6A or another category.

This distinction is useful when comparing generic networking accessories because some sellers may use network-category terms loosely when describing faceplates.

Clean and Professional Network Installation

One of the strongest reasons to install a network faceplate is presentation.

Permanent cable coming directly through a wall can leave a network installation looking unfinished. It can also make it easier for the permanent cable to be pulled, bent or repeatedly handled.

A properly installed faceplate creates a defined network outlet where the user connects a removable patch cable.

This makes the setup more suitable for:

• Offices

• Commercial buildings

• Schools

• Computer rooms

• Residential networks

• Retail locations

• Reception areas

• Meeting rooms

• Equipment rooms

It also makes future device changes easier because end-user equipment can normally be disconnected from the patch lead without disturbing the permanent cabling behind the outlet.

Best Uses for 1 Port Network Faceplate

The 1 Port Network Faceplate is most useful where only one permanent network connection is required at a particular position.

Common applications include:

Office Workstations

A single outlet can provide a permanent network point beside an individual desk or workstation.

Network Printers

Where a printer is installed permanently in one location, a dedicated wall network outlet helps keep the cabling organized.

Home Networking

A faceplate can be used in rooms where a wired Ethernet point is required for a computer, television or other compatible network device.

Retail and POS Installations

Shops and business premises may use a dedicated network point near a POS workstation, counter or office location.

Schools and Institutions

Structured outlets can be installed in classrooms, offices, libraries and computer rooms.

Business Networks

Single-port wall outlets can form part of a larger structured cabling installation linked back to a patch panel and network cabinet.

For larger commercial networks, OrbitLink Solutions may be relevant for professional structured cabling, network design and business network installation, while Tawa remains the buying destination for networking products and accessories.

One Port or Multiple Ports?

A single-port faceplate is appropriate when one permanent network connection is enough.

Before ordering, however, consider whether a second connection may be required in the same location.

For example, an office desk may eventually need separate wired connections for a computer and an IP phone. In such a situation, a multi-port faceplate may offer greater flexibility.

For a location with only one device or one planned network run, the 1 Port Network Faceplate provides a straightforward solution without unnecessary unused openings.

Planning the number of outlets before installing network cable can reduce the need for alterations later.

Installation Considerations

The faceplate must be compatible with the other physical components used in the installation.

Before installation, check:

• Faceplate mounting format

• Compatible back box or mounting box

• Network module or keystone dimensions

• Cable category

• Required number of ports

• Installation location

• Space available behind the outlet

Do not assume that all faceplates, back boxes and keystone modules are universally interchangeable.

Although many networking products use common modular formats, manufacturer designs can differ.

For a larger installation, it is sensible to test one combination of faceplate, jack and mounting box before purchasing large quantities.

Cable Termination

Correct cable termination is essential to the performance of the finished network point.

The faceplate may make the installation look professional, but it cannot compensate for problems such as:

• Incorrect conductor termination

• Excessively untwisted cable pairs

• Damaged network cable

• Poor-quality connectors

• Incorrect wiring

• Excessive bending

• Poor cable routing

Network installers should follow the termination instructions supplied with the selected network jack or module.

Where network performance is important, completed structured cabling should be tested using appropriate network cable testing equipment.

Who Should Buy 1 Port Network Faceplate?

The 1 Port Network Faceplate Kenya product category is suitable for several types of buyers.

Network Installers

Installers can use single-port faceplates to complete professional Ethernet wall outlets for customers.

IT Departments

Businesses extending or repairing their office networks may require replacement faceplates or additional network points.

Electricians and Structured Cabling Contractors

Contractors installing data cabling alongside other building services can use faceplates to create finished communication outlets.

Homeowners

Homeowners building wired Ethernet networks can use faceplates instead of leaving loose cable ends at connection points.

Schools and Businesses

Organizations installing permanent network infrastructure can use single-port outlets in locations where only one Ethernet connection is needed.

What to Check Before Buying

Before you buy 1 Port Network Faceplate in Kenya, verify the exact product configuration.

1. Confirm the Port Type

Make sure the opening is designed for the network module you intend to use.

2. Confirm the Mounting Format

Check that the faceplate fits your existing or planned mounting box.

3. Check Whether a Network Jack Is Included

Do not assume that an RJ45 or keystone jack is supplied with the faceplate.

Some products are sold as the plate only.

4. Confirm Physical Dimensions

Faceplates are produced in different physical formats. Check the actual dimensions if you need the product to match an existing wall box.

5. Check the Required Quantity

For a multi-room or office cabling project, count the number of network outlets required before ordering.

6. Confirm Related Accessories

Depending on the installation, you may also require network cable, keystone jacks, patch cords, patch panels, wall boxes or other cabling accessories.

Checking these items together can help prevent installation delays.

1 Port Network Faceplate Price in Kenya

The 1 Port Network Faceplate price in Kenya depends on the particular manufacturer, design, material, included components and supplier stock.

The selling price may also change because of:

• Stock availability

• Exchange rates

• Import and shipment costs

• Manufacturer

• Product construction

• Package contents

• Quantity purchased

Because the precise Tawa SKU and current price have not been independently verified here, it would be inaccurate to provide a specific Kenya price.

Check Tawa for the latest 1 Port Network Faceplate price in Kenya, current stock status and available related networking accessories.

Why Choose a Single-Port Network Faceplate?

For a simple network installation, using a dedicated faceplate provides a much cleaner termination than leaving permanent Ethernet cable exposed.

It creates a defined network point, makes the installation easier to use and helps separate permanent building cabling from removable patch leads.

The single-port format is particularly practical where the network design calls for only one connection at each location.

It is therefore useful for both small residential projects and larger structured cabling deployments where selected positions require individual network outlets.

Buy 1 Port Network Faceplate in Kenya

The 1 Port Network Faceplate is a straightforward structured cabling accessory designed to provide a clean mounting point for one compatible network connection. It is suitable for offices, homes, schools, shops and commercial installations where permanent Ethernet cabling needs a professional wall termination.

Before ordering, confirm the physical dimensions, mounting system, module compatibility and exact package contents. In particular, check whether the network jack and mounting accessories are included or need to be purchased separately.

To buy 1 Port Network Faceplate in Kenya, shop through Tawa and check the latest price, availability and compatible structured cabling accessories for your installation.