D Link Des F1016P E B 16 Port Poe Surveillance Switch
D-Link DES-F1016P-E 16-Port PoE+ Surveillance Switch The D-Link DES-F1016P-E 16-Port PoE+ Surveillance Switch is an unmanaged network switch designed for IP CCTV and surveillance installations that require multiple Power over Ethernet connections from one central switch. It provides 16 10/100...
Delivery: Nairobi same-day to 1 day; nationwide 1–5 business days.
Warranty: Manufacturer warranty where applicable.
Description
D-Link DES-F1016P-E 16-Port PoE+ Surveillance Switch
The D-Link DES-F1016P-E 16-Port PoE+ Surveillance Switch is an unmanaged network switch designed for IP CCTV and surveillance installations that require multiple Power over Ethernet connections from one central switch. It provides 16 10/100 Mbps PoE RJ45 ports, allowing compatible IP cameras and other PoE devices to receive network data and electrical power through the same Ethernet cable.
With a 150W total PoE power budget, IEEE 802.3af/at support and surveillance-focused operating modes, the DES-F1016P-E is particularly useful for offices, schools, warehouses, apartment developments, retail premises, institutions and commercial CCTV projects.
One of its strongest practical features is long-distance connectivity. D-Link specifies that ports 1–8 can support up to 250 metres of power and data transmission in Extend Mode when appropriate Cat5e or Cat6 cabling is used. This can make installation easier where cameras are located far from the main network cabinet.
Key Features of D-Link DES-F1016P-E
-
16 × 10/100 Mbps PoE RJ45 ports
-
IEEE 802.3af PoE support
-
IEEE 802.3at PoE+ support
-
150W total PoE power budget
-
Up to 250m transmission on ports 1–8 in Extend Mode
-
2 Gigabit ports with a Gigabit RJ45/SFP combo uplink
-
7.2 Gbps switching capacity
-
3.868 Mpps packet forwarding rate
-
VLAN isolation operating mode
-
QoS operating mode
-
PoE power recovery mode
-
IEEE 802.3x Flow Control
-
Auto MDI/MDIX
-
6kV lightning protection
-
Plug-and-play unmanaged operation
-
Fanless design
-
100–240V AC power input
-
Compact metal-style desktop/rack-width enclosure
-
Designed specifically for surveillance networking
16 PoE Ports for IP Cameras
The D-Link DES-F1016P-E provides 16 Fast Ethernet PoE ports, numbered 1 through 16.
Each of these ports can provide network connectivity while supplying power to compatible PoE equipment. This makes the switch especially useful when installing multiple IP cameras around a property.
Instead of running separate Ethernet and electrical connections to every compatible camera, the installer can use one Ethernet cable between the switch and camera.
This can simplify:
-
Cable management
-
Camera installation
-
Power distribution
-
Troubleshooting
-
CCTV network expansion
The camera-facing ports operate at 10/100 Mbps, rather than Gigabit Ethernet. Buyers who require Gigabit connectivity on every connected endpoint should therefore consider a Gigabit PoE switch instead.
IEEE 802.3af and 802.3at PoE Support
D-Link specifies support for both IEEE 802.3af and IEEE 802.3at Power over Ethernet.
This allows the DES-F1016P-E to work with a wide range of standards-compliant powered devices, including many:
-
IP cameras
-
PoE access points
-
VoIP devices
-
Other compatible PoE network equipment
The switch provides a total 150W PoE power budget.
The total power requirement of all devices connected simultaneously must remain within this overall budget.
When building a surveillance system, check each camera's maximum PoE power consumption rather than assuming that any combination of 16 PoE cameras can be powered at the same time.
This is particularly important for power-hungry devices such as some PTZ cameras, cameras with powerful infrared illuminators or other higher-consumption surveillance equipment.
Up to 250m Long-Range PoE
A major feature of the DES-F1016P-E is its dedicated Extend Mode.
According to D-Link's official datasheet, ports 1–8 support power transmission over distances of up to 250 metres when Extend Mode is enabled and Cat5e or Cat6 cable is used.
This makes the switch attractive for CCTV systems covering larger properties where some cameras may be positioned far away from the control room or network cabinet.
Typical applications include:
-
Warehouse compounds
-
School grounds
-
Parking areas
-
Factory premises
-
Apartment developments
-
Perimeter surveillance
-
Commercial compounds
-
Large institutional properties
The 250-metre figure is a manufacturer-rated maximum under suitable operating conditions. Real-world performance still depends on factors such as cable quality, terminations, connected equipment and the installation environment.
For long cable runs, use genuine copper Ethernet cable of the correct category and ensure that terminations are professionally completed.
Gigabit Uplink Connectivity
The DES-F1016P-E combines its Fast Ethernet PoE camera ports with faster Gigabit connectivity for uplinks.
D-Link officially specifies:
-
2 Gigabit ports
-
1 Gigabit RJ45/SFP combo uplink
This gives installers flexibility when connecting the CCTV access switch to upstream infrastructure.
The uplink can be used to connect toward equipment such as:
-
An NVR
-
Main network switch
-
Router
-
Server-room switch
-
Network backbone
-
Compatible fibre connection
The SFP option can be particularly useful where a surveillance network needs to connect across buildings or to a central communications room through fibre.
Where a specific uplink arrangement is important to your project, confirm the physical port layout on the exact unit being supplied before ordering.
7.2 Gbps Switching Capacity
D-Link specifies a 7.2 Gbps switching capacity for the DES-F1016P-E.
The manufacturer also specifies a maximum packet forwarding rate of 3.868 Mpps.
These figures reflect the switch's internal forwarding capability and are suitable for its intended role as an access switch within a Fast Ethernet IP surveillance network.
The switch also supports IEEE 802.3x Flow Control, helping manage traffic when network congestion occurs.
Surveillance Operating Modes
The DES-F1016P-E includes DIP-switch selectable operating modes designed specifically for CCTV and surveillance installations.
Extend Mode
Extend Mode allows ports 1–8 to support transmission distances of up to 250 metres when appropriate Ethernet cable is used.
This is useful for cameras installed farther away from the switch than a normal Ethernet deployment would typically allow.
VLAN Mode
VLAN Mode isolates ports 1–16 from one another.
This means devices connected to individual surveillance ports cannot directly communicate with each other through those access ports.
Port isolation can help reduce unnecessary communication between endpoint devices and can assist in suppressing network storms.
QoS Mode
The switch includes a dedicated QoS Mode.
D-Link describes this mode as prioritising applications such as video traffic to help surveillance transmission operate more smoothly.
This can be useful because CCTV networks often carry continuous video streams from multiple cameras simultaneously.
Power Mode
D-Link also specifies a Power Mode that automatically detects a powered device that has stopped responding and can power-cycle the affected connection.
For surveillance networks, this may help restore certain connected PoE devices without requiring someone to physically unplug and reconnect their power.
Plug-and-Play Unmanaged Operation
The DES-F1016P-E is designed for straightforward deployment.
It does not require the administrator to configure a complex managed-switch interface for normal operation.
Features such as Auto MDI/MDIX also simplify Ethernet connectivity by automatically handling cable connection requirements.
For many CCTV installations, the process involves connecting:
-
The surveillance cameras
-
The upstream network or NVR
-
AC power to the switch
-
The required DIP-switch operating mode
This makes the switch suitable for installers and organisations that need a relatively simple PoE surveillance platform.
However, businesses requiring advanced managed-switch capabilities such as extensive VLAN configuration, SNMP monitoring, detailed port management or link aggregation should consider a managed switch instead.
150W PoE Power Budget
The D-Link DES-F1016P-E provides 150 watts of total available PoE power.
This is an important specification when planning a multi-camera installation.
For example, having 16 PoE ports does not necessarily mean the switch can simultaneously provide the maximum possible IEEE 802.3at power level to all 16 ports.
The combined consumption of connected powered devices must remain within the 150W system budget.
Before buying, calculate:
-
Number of cameras
-
Maximum power consumption per camera
-
Whether cameras use infrared LEDs
-
Whether any cameras use motors or PTZ systems
-
Power requirements of any other PoE devices
This will help determine whether the DES-F1016P-E has sufficient PoE capacity for the planned installation.
6kV Lightning Protection
D-Link specifies 6kV lightning protection for the DES-F1016P-E.
This adds protection against certain electrical surges that can occur in network installations.
However, this built-in protection should not be treated as a substitute for correctly designed electrical protection.
For outdoor CCTV installations, exposed Ethernet runs or locations prone to electrical surges, appropriate earthing and external surge protection may still be necessary.
Fanless Design
The switch uses a fanless cooling design.
This eliminates fan noise and removes one mechanical cooling component from the system.
Fanless operation can be useful when the switch is installed in:
-
Offices
-
Security rooms
-
Equipment cabinets
-
Reception areas
-
Small network rooms
The switch should still be installed in a properly ventilated location within D-Link's specified environmental limits.
Physical and Environmental Specifications
D-Link specifies the following physical characteristics:
-
Dimensions: 285 × 180 × 44 mm
-
Weight: approximately 2.1 kg
-
Operating temperature: 0°C to 40°C
-
Operating humidity: 10% to 90% non-condensing
-
Power input: 100–240V AC, 50–60Hz
-
Cooling: Fanless
These specifications make the DES-F1016P-E suitable primarily for controlled indoor networking and surveillance installations.
Best Uses for D-Link DES-F1016P-E
The D-Link DES-F1016P-E is particularly suitable for:
-
IP CCTV installations
-
Office surveillance systems
-
School camera networks
-
Apartment CCTV installations
-
Warehouse security
-
Retail surveillance
-
Factory CCTV networks
-
Hotel security systems
-
Parking-area surveillance
-
Institutional camera systems
-
Multi-camera commercial projects
-
Long-distance PoE camera installations
Its long-range mode is especially useful for larger sites where some cameras need to be positioned considerable distances from the network cabinet.
For more complex deployments involving fibre backbones, multiple network cabinets, enterprise networking or professional CCTV network design, businesses can also use professional network installation services from OrbitLink Solutions.
Who Should Buy the D-Link DES-F1016P-E?
The DES-F1016P-E is a suitable choice for CCTV installers, security companies and organisations that require multiple standards-based PoE camera connections without needing a fully managed enterprise switch.
It is particularly useful for buyers who need:
-
16 PoE camera ports
-
A substantial central PoE budget
-
Long-distance PoE capability
-
Gigabit uplink connectivity
-
Fibre uplink flexibility
-
Simple unmanaged deployment
-
Surveillance-oriented operating modes
It may not be the best choice where all connected devices require Gigabit access ports, because ports 1–16 are 10/100 Mbps Fast Ethernet ports.
What to Check Before Buying
Before purchasing the D-Link DES-F1016P-E, confirm the requirements of your CCTV installation.
Check that the connected cameras support IEEE 802.3af or IEEE 802.3at PoE.
Calculate the combined maximum power requirement of the PoE devices and make sure it fits within the 150W total PoE budget.
If you intend to use long-range mode, confirm your cable quality and understand that the up to 250m capability applies to ports 1–8 in Extend Mode.
If you intend to use fibre, confirm the required SFP module, fibre type and connector arrangement separately.
Also confirm the product code printed on the actual unit. D-Link's official documentation identifies the model as DES-F1016P-E. If a seller lists it as DES-F1016P-E/B, the /B suffix should be verified against the physical stock before treating it as a separate official D-Link model.
D-Link DES-F1016P-E Price in Kenya
The D-Link DES-F1016P-E price in Kenya can vary depending on current market conditions.
Factors affecting the selling price may include:
-
Stock availability
-
Exchange rates
-
Import and shipping costs
-
Supplier stock batches
-
Accessories required
-
Current distributor pricing
Because D-Link does not provide a fixed Kenya retail price on the official product documentation reviewed for this description, no unverified price should be inserted here.
For the latest D-Link DES-F1016P-E price in Kenya, current availability and compatible networking accessories, check Tawa.
Buy D-Link DES-F1016P-E in Kenya
The D-Link DES-F1016P-E 16-Port PoE+ Surveillance Switch is built for CCTV networks requiring multiple PoE camera connections, long-distance deployment and straightforward unmanaged operation.
Its verified specifications include 16 10/100 Mbps PoE ports, IEEE 802.3af/at support, a 150W PoE power budget, up to 250m transmission on ports 1–8, Gigabit uplink connectivity, VLAN isolation, QoS mode, automatic PoE recovery and 6kV lightning protection.
It is best suited to professional and commercial surveillance installations where Fast Ethernet camera ports are sufficient and simple centralised PoE distribution is required.
Before ordering, confirm the total power requirements of your cameras, cable distances, required SFP accessories and the exact model/revision printed on the supplied unit.
To buy the D-Link DES-F1016P-E in Kenya, check Tawa for the latest price, stock availability and compatible CCTV networking accessories.